Loc8tor Loc8tor GPS Instruction Manual - page 7
Loc8tor GPS Instruction Manual ©2014 Loc8tor Ltd.
7
Left Hand Menu Panel
Tracker
– shows name or IMEI of the device you’re looking at
Location
– Shows closest street address, latitude and longi-
tude of your GPS device the last time it reported.
Speed
– If travelling by car, bike etc shows speed GPS device
is travelling.
Last Reported Time
– Last time GPS reported its position.
You can change the frequency your device reports in ‘Com-
mands’ in the top menu bar.
Last Command Se
nt – Last command given to the GPS de-
vice. Controlled from Commands in the top menu bar.
Satellite / Street View
– Gives you the ability to view the
map either from a satellite (similar to Google Earth) or as a
virtual map.
Follow tracker
- Click on ‘Follow Tracker’ to see route your
device has been and direction it’s going in real time. Un-tick
to remove lines.
Advanced
– Offers an alternative view which is ideal for
those with more than one GPS associated with one tracking
panel log in..
Right Hand Menu Panel
Battery
- Shows battery level when device last reported
GPS
– Shows strength of GPS signal. If there’s no GPS signal the device cannot report its
location.
Device Off/On
– to conserve battery if your GPS does not move for more than 40 seconds
it goes to sleep. As soon as your device is on the move it wakes up and turns green.
Zones Off/On
– Informs at a quick glance whether you have any safety zones set-up.
Alarms Off/On
– Informs whether you’ve got an Alert.
Charging/Not Charging
– Turns green when charging
Battery OK
– Green light confirms battery has power
Set Motion Alert
– the device comes supplied with a built in motion sensor. To switch on
motion sensor click button. A green light will appear informing you the device is armed.
When moved, GPS will activate an alarm on the tracking panel and send alerts (if set up).