Logan Graphic Products Pro Joiner Model F300-2 Instruction Manual - Identification
Identification
Instruction Manual
Model F300-2
PRO JOINER
V-nails - Moulding fasteners.
Lever - Arbor press handle used to drive clamped
moulding on to V-nails.
Lever Adjustment Block - Block which moves to
locate pressure foot and adjust lever height.
Moulding Spacer - Helps in driving awkward profile
mouldings onto V-nails.
Pressure Foot - Urethane coated foot which locates
on moulding joint and drives wood onto nails.
V-nail Slide Cartridge - Allows V-nail blocks to be
moved out for easy loading.
V-nail Blocks - Two blocks which hold V-nails.
V-nail Gauge - Allows for “no guessing” set-up of
nail spacing.
Vise - Quick set jaw locks moulding in place. Clamp
moves up and down to drive wood onto nails.
Pressure Foot
Lever
Lever
Adjustment
Block
Vise
V-nail Slide
Cartridge
V-nail Blocks
V-nails
Extension Arms
V-nail Corner
Spacing Stop
(Not visible)
Lever Height
Wheel
Vise Stop
Moulding
Spacer
V-nail
Gauge
1
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 Toll Free 1 800 331 6232 www.logangraphic.com