- DL manuals
- Logic Controls
- Keyboard
- KB5000 Series
- User Manual
Logic Controls KB5000 Series User Manual
Summary of KB5000 Series
Page 1
Programmable pos keyboard 66 programmable keys user manual kb5000 series.
Page 2
2 kb5000 user manual rev. 2 notice the manufacturer of the pos programmable keyboard makes no representations or warranties, either expressed or implied, by or with respect to anything in this manual, and shall not be liable for any implied warranties of fitness for a particular purpose or for any i...
Page 3: Table of Contents
3 kb5000 user manual rev. 2 table of contents features…………………………………………………………............. 4 carton contents……………………………………………………... 5 models……………………………………………………………………... 5 hardware connections……………………………………………. 6 functionaltest………………………………………………………… 7 utility disk contents………………………………………………... 8 inst...
Page 4
4 kb5000 user manual rev. 2 features • 66 key, programmable alphanumeric keyboard • optional integrated credit card reader • all 66 keys are programmable and relegendable with transparent key caps • multiple layers of key definitions and multiple shift levels • keylock switch for layer selection • p...
Page 5
5 kb5000 user manual rev. 2 carton contents kb5000 1. Programmable keyboard kb5000 series 2. Computer interface cable - rj11 to male ps/2 mouse and keyboard interface (for kb5000u models: rj45 to usb type a interface) 3. Programming utility software and user’s manual disk 4. Legend label sheet 5. 2 ...
Page 6
6 kb5000 user manual rev. 2 hardware connections the kb5000 can be connected to a ps/2 computer, or computer terminal. The following diagram shows how the keyboard connects to the computer and standard keyboard or other keyboard peripheral (magnetic stripe reader, scanner, etc.). Note: before making...
Page 7
7 kb5000 user manual rev. 2 functional test for testing purposes, your kb5000 keyboard was pre-programmed with a key definition template called kb5000-l1.Tpl. The following simple steps will verify that the keyboard is in good working condition: 1. Follow the hardware connections directions on page ...
Page 8
8 kb5000 user manual rev. 2 utility disk contents all kb5000 keyboards come with a utility software disk. This disk contains several important files: setup.Exe this utility will install the keyboard programming utility on your computer. Use this utility with the keyboard attached. Kb5000-l1.Tpl kb50...
Page 9
9 kb5000 user manual rev. 2 installing the lci keyboard programming utility 1. Make sure the kb5000 is attached to the computer. 2. Double click the setup.Exe file on the utility diskette. 3. Select the destination folder if necessary and click “install” to start the installation process. Skip any w...
Page 10
10 kb5000 user manual rev. 2 menu commands [template] [new] clear all key definitions. [load] load key definitions from template file on disk. (*.Tpl) [save] save key definitions to template file on disk. (*.Tpl) [save as] save key definitions to template file on disk with new filename. (*.Tpl) [loa...
Page 11
11 kb5000 user manual rev. 2 programming the keyboard 1. Connecting the keyboard for ps/2 versions: connect the kb5000 to the pc with the special interface cable provided. Plug the standard pc keyboard to the female ps/2 connector on the interface cable and the male ps/2 connector to the computer. F...
Page 12
12 kb5000 user manual rev. 2 editing key definitions 1. Selecting keys to edit use shift key and the arrows keys on the standard keyboard to select the key for editing. Hold down the shift keyand hit the arrow keys until the key to be edited is being highlighted. 2. Checking key definitions the curr...
Page 13
13 kb5000 user manual rev. 2 • for special function keys, use and to enter their scan code in this mode. Forexample, to program into the key position, hit first, followed by . To program , hit twice. • since the following 4 keys are used by windows, we cannot use + to program thesekeys: , , , . Thes...
Page 14
14 kb5000 user manual rev. 2 o [shiftlevel*] multi-shift-level function key definition for different shift levels (* is from 1 to 9). To define a multi-shift-level function key, click on the icon and enter the level number. • decimal equivalent numeric values for ascii codes (only 1 to 240 allowed) ...
Page 15
15 kb5000 user manual rev. 2 [shiftlevel2] key and then press the multi-definition key will send out level 2 definition, and so on. B. Inter-string delay • a delay time up to 100 seconds can be inserted between key stroke outputs by clicking on the icon on thetool bar or key edit→insert delay time o...
Page 16
16 kb5000 user manual rev. 2 modifying properties of the keyboard after key definitions are finished, click on the item configuration→config kb properties on the menu bar or click on the “modify properties” icon on the toolbar to set or change programmable keyboard features. Config opos/jpos • you m...
Page 17
17 kb5000 user manual rev. 2 delimited text template file the new programmable keyboard utility can import and export a delimited text file directly. The text file may have two columns and as many rows as number of keys (see the example .Txt file in the utility diskette). Columns are delimited by co...
Page 18
18 kb5000 user manual rev. 2 key label color to identify the status of a key during template editing, the key label is displayed in three different colors. • black - the key is blank with no definition. • blue - when a template is loaded from file or read from keyboard, all keys that are not blank w...
Page 19
19 kb5000 user manual rev. 2 in this example of the kb5000 template, the r31 key is a modified key and is indicated by the color green..
Page 20
20 kb5000 user manual rev. 2 programming examples 1. Special features to program key sequence then , the key need to be released before pressing . Otherwise,the definition will be interpreted as , f9>. • [ctrl][a][0f0][ctrl][f9] 2. Multi-shift-level function this function programs a key that contain...
Page 21
21 kb5000 user manual rev. 2 token names for special function keys there are no ascii codes for some function keys. They have to be programmed with scan codes. In key definitions, the following symbols represent their scan codes. The token name symbols are case sensitive. They have to be entered exa...
Page 22
22 kb5000 user manual rev. 2 [alt+printscreen] function key + [pad0] number key on keypad [pad1] number key on keypad [pad2] number key on keypad [pad3] number key on keypad [pad4] number key on keypad [pad5] number key on keypad [pad6] number key on keypad [pad7] number key on keypad [pad8] number ...
Page 23
23 kb5000 user manual rev. 2 editing msr parameters (for keyboards equipped with optional msr) before editing the parameters, please refer to the user manual of the point-of-sale software or credit card verification software to find out what are the requirements on the output format. To configure th...
Page 24
24 kb5000 user manual rev. 2 1. Edit the keyboard programming template; or load a template from a file; or read the template from the keyboard. In the programming utility main menu, click configuration on the menu bar and then click on [edit mr data]. You can also click the “mr data edit” icon on th...
Page 25
25 kb5000 user manual rev. 2 enable lrc: enable lrc output for each track. If enabled, lrc will be sent as 2 hex characters. Hex values a to f (10 to 15) are represented by characters : ; and ? Respectively. 7. Enable start sentinel: enable individual track "start sentinel" output. Enable separator:...
Page 26
26 kb5000 user manual rev. 2 specifications kb5000 programmable pos keyboard specifications mechanical interface weight: 2.3 lbs ps/2 keyboard with wedge port, standard usb, optional dimension (i h ) front height 1.2 output data f t ps/2 – scancode rear height 1.8 usb – usb keyboard code width 15.7 ...