- DL manuals
- Logic
- Washer
- L614WMS12
- Installation manual / instruction manual
Logic L614WMS12 Installation manual / instruction manual
Summary of L614WMS12
Page 1
8kg/6kg washing machine installation guide / instruction manual l812wm12 / l614wms12 l812wm12_614wms12_ib_120709_rc04_annie.Indd 1 12年7月9日 上午10:50
Page 2
L812wm12_614wms12_ib_120709_rc04_annie.Indd 2 12年7月9日 上午10:50
Page 3: Contents
Contents unpacking .................................................................................................................................... 5 installing your washing machine ............................................................................................... 6 choosing the rig...
Page 4
Hints and tips ............................................................................................................................20 troubleshooting ........................................................................................................................22 error code ...........
Page 5: Unpacking
5 unpacking remove all packaging from the unit. Retain the packaging. If you dispose of it please do so according to local regulations. The following items are included: the main unit thank you for purchasing your new logik washer machine. We recommend that you spend some time reading this installat...
Page 6
Installing your washing machine please read and follow the instructions carefully. • in addition to the instructions mentioned here, special regulations of the relevant water and power supply companies may apply. If in doubt, have the washing machine connected by a qualified technician. • the washin...
Page 7: Moving and Installing
Moving and installing do not run the washing machine without removing the bolts, as this can cause excessive vibrations. Installing the noise protection board to reduce the noise produced by the washing machine, install the noise protection board. 1. Lay down the machine. Unscrew the four feet. 2. F...
Page 8
Moving the washing machine from one location to another before you move the washing machine: • shut off the tap and run the washing machine to drain the water. Drain any remaining water from the pump hose. • disconnect the mains cable. • attach the transit bolts. To remove the transit bolts: 1. Use ...
Page 9
Levelling the washing machine there are 4 levelling feet on the underside. They must be adjusted to make sure the washing machine is level. 1. On each stand, loosen the lock nut by turning it clockwise with a spanner. 2. Adjust all four feet in this way. 3. Use a spirit level to ensure the washing m...
Page 10
Water drain hose points to remember: • don’t twist, pull out or bend the drain hose. • your washing machine should be no more than 250cm from the drain outlet. Draining to a sink or wash-basin • secure the drain hose in position, so it can’t drop out of the basin. • don’t block the basin’s drain out...
Page 11: Product Overview
11 product overview the unit standard cotton synthetic wool power express 15’ time to end temprature extra rinse intense start/pasue pre-wash standard quick wash stardard quick wash lingerie mix sport wash spin/drain drain drum clean the detergent compartment the control panel door handle drainage h...
Page 12
12 the control panel standard cotton synthetic wool power express 15’ time to end temprature extra rinse intense start/pasue pre-wash quick wash stardard quick wash lingerie mix sport wash rinse spin drum clean 1 2 3 4 6 7 5 1. The detergent compartment 2. Programme dial • different wash programmes ...
Page 13: Preparation
13 preparation read the following to understand how best to prepare your laundry for washing. Organising laundry • read the washing label on each garment to help you sort your washing into different loads. • sort the laundry by colour, type of fabric and by how soiled it is. This will help you choos...
Page 14
14 selecting the programme (for model l812wm12) here are the available programmes, additional functions and option settings. Spin speed can be selected separately for certain programmes. Programme description 1 2 preset setting max. Load temperature default spin (rpm) approximate time (h) expr ess 1...
Page 15
Selecting the programme (for model l614wms12) here are the available programmes, additional functions and option settings. Spin speed can be selected separately for certain programmes. Programme description 1 2 preset setting max. Load temperature default spin (rpm) approximate time (h) expr ess 15’...
Page 16: Wash Setting
16 5. Press the start/pause button to start the washing. 6. The washing machine will sound and the display window will show “end” when the programme is complete. Wash setting first time use when first using the washing machine, use “drum clean”, and let it run unloaded for one programme to prevent t...
Page 17
17 optional functions depending on the programme you select, you can combine different optional functions. You may need to press the function buttons more than once to get all the functions you want. Optional function when you want to how it works water temperature (press the temperature button) adj...
Page 18: Important Information
18 important information washing delicates these programmes rock the drum gently for best results on delicate laundry. • tips for wool programme: approximate weights: -wool sweater (400g) -blouse / lingerie (200g) -trousers (400g) adding delicate laundry items to the drum • close zips and buttons. •...
Page 19
19 maintenance – cleaning the washing machine cleaning the drum any rust left inside the drum by metal articles must be removed immediately with chlorine-free detergent. Never use steel wool. Also there is a drum clean function: 1. Add a little detergent. Close the door. Press the power button to sw...
Page 20
20 2. Carefully loosen the drain filter. Water may drain out - this is normal. 3. Turn it anticlockwise, unscrew the filter and remove it. 4. Remove any lint and debris before carefully replacing the filter. 5. Turn it clockwise and screw the filter back in place. Preventing a frozen water supply ho...
Page 21: Hints And Tips
21 hints and tips problems solutions buttons don’t work • key lock is activated. Deactivate the key lock function. • the washing machine is operating a wash programme. • the programme dial was turned to a different programme. Door doesn’t open • door lock may be active. • the water temperature or le...
Page 22
22 there’s a lot of foam • the amount of foam can vary depending on the temperature, level and softness of your water. • you may have used too much detergent. • the type of detergent you use could cause excess foam. There’s no foam • this can happen if you’ve put powder detergent directly into the d...
Page 23: Troubleshooting
23 troubleshooting troubles reason solution washing machine cannot start up • check that the door is closed tightly. • check that the power plug is inserted correctly. • check that the water supply tap is open. • check that the power button is pressed. • check that the start/pause button is pressed....
Page 24
24 display fault what to do: there is a lot of foam in the washing machine or motor failure. Select and run a programme to fill and then drain the washing machine or ask a qualified technician to repair it. Water overflow. Ask a qualified technician to repair it. Washing machine has an unbalanced lo...
Page 25: Specifications
25 specifications model l812wm12 l614wms12 rated voltage 220 - 240 v ~ rated frequency 50hz maximum energy rated power input 2000w heating energy rated power input 1800w dimensions (h x d x w mm) 850 x 650 x 595 850 x 510 x 595 weight of the product 72 kg 65 kg pressure of tap water (0.03 ≤ p ≤ 1) m...
Page 26
26 product fiche (for model l812wm12) model: l812wm12 rated capacity: 8 kg energy efficiency class: a+++ energy consumption is 185 kwh per year based on 220 standard washing cycles for cotton programmes set at 60° c and 40° c, with full and partial loads, and set at low-power modes. Actual energy co...
Page 27
27 product fiche (for model l614wms12) model: l614wms12 rated capacity: 6 kg energy efficiency class: a+ energy consumption is 176 kwh per year based on 220 standard washing cycles for cotton programmes set at 60° c and 40° c, with full and partial loads, and set at low-power modes. Actual energy co...
Page 28: Safety Warnings
28 safety warnings for your continued safety and to reduce the risk of injury or electric shock, please follow all the safety precautions listed below. Warning! • if you will not be using the washing machine for a while such as when you go on holiday, turn off the water supply to the washing machine...
Page 29
29 to prevent injury • do not climb on the washing machine. You may hurt yourself or damage the washing machine. • when opening and closing the door ensure you keep fingers away from the door hinge, or this could lead to injury. • check your washing for objects such as nails, pins, coins, clips etc....
Page 30
Note: if you require a replacement for any of the items listed below, please quote their corresponding part numbers: replacement part part number water supply hose 0020300158a noise protection board 0020501896 (l812wm12) 0020501889a (l614wms12) u-shape holder 00221123015002 cover cap 0020202911 dsg ...
Page 31
Fac tor y c ode: 0020505574ak l812wm12_614wms12_ib_120709_rc04_annie.Indd 31 12年7月9日 上午10:51.
Page 32
L812wm12_614wms12_ib_120709_rc04_annie.Indd 32 12年7月9日 上午10:51.