Logic L614WMS12 Installation manual / instruction manual - Wash Setting
16
5. Press the Start/Pause button to start the washing.
6. The washing machine will sound and the display window
will show “End” when the programme is complete.
Wash Setting
First Time Use
When first using the washing machine, use “Drum Clean”, and let it run unloaded for one programme to
prevent the laundry from being tainted by oil or dirty water from the washing machine.
Standard Washing
1. Pull the door handle and put the laundry in the drum.
Make sure no laundry gets caught in the door.
2. Close the door. Press the Power button to switch on the
washing machine. Turn the Programme Dial to select
your wash programme. The washing finishing time will be
displayed.
3. Select any Optional Functions.
4. Add detergent into the detergent drawer. The quantity
of detergent will depend on the amount of laundry, the
degree of soiling and the water hardness. Use the amount
of detergent suggested on the packaging.
Standard
Cotton
Synthetic
Wool
Express 15’
Pre-wash
Quick wash
Stardard
Quick wash
Lingerie
Mix
Sport wash
Rinse
Spin
Drum clean
If the door is locked and you switched the washing
machine off - or if there’s a power cut - it will stay
locked for 1 minute until you turn it back on again.
When you start the washing machine, the indicator flashes to confirm the function is in progress.
Once the washing machine has started, you can’t change the programme.
• For pre-wash programme, detergent should be
added to both compartments 1 and 2.
• For other programmes, DO NOT add detergent
to compartment 1.
2
1
Main wash
detergent
Softener
Pre-wash
detergent
Manual Soaking
To manually soak your laundry, press the Start/Pause button after 10 minutes of the wash programme. The
washing machine will suspend the laundry to soak it in the water. After your desired soaking time, press
the Start/Pause button, the machine will continue the previous wash.
L812WM12_614WMS12_IB_120709_RC04_Annie.indd 16
12年7月9日 上午10:50