M-Audio Delta Audiophile 2496 Manual - page 26
26
you for some reason must send AC-3 in professional mode, be sure to set the Data Type
to “Non-Audio” for the same reasons outlined in the above paragraph.
Professional Format Advanced Settings (Emphasis): The user may choose to
indicate or not indicate if pre-emphasis has been applied to the outgoing digital
audio signal. The default is “None” and rarely will any user want to set the value to
“CCITT” or “50/15uSec” unless the transmitted audio has been encoded with one of
those types of pre-emphasis.
About Page
The “About” page, while displaying the handsome M Audio logo and applicable
copyright information, also reports the driver version and control panel software
version. If you have Internet browsing capabilities and are currently connected to
the Internet, clicking on the Midiman copyright will link you to the M Audio /
Midiman web site (PC only).
Save, Delete, Load Buttons; H/W Installed
ON THE PC, at the rightmost side of the Delta Control Panel are the Save, Load and
Delete buttons as well as an “installed hardware” set of radio buttons. These controls
appear regardless of what Delta Control Panel page is being displayed.
SAVE, DELETE, LOAD: The Delta Control Panel always retains the last settings
entered. However the Save, Delete, and Load functions expand this capability to store
different sets of control panel settings using different configuration names. These
configurations are then available for recall at a later date and time.
Clicking the ‘Save’ button brings up a dialog box prompting you to name the current
configuration. Once you have done this, click ‘OK’, and your current configuration has
been saved to disk. If you decide that you no longer need a particular configuration, click
the ‘Delete’ button. Highlight the name of the configuration file that you wish to delete,
and click the ‘OK’ button. To recall or reload a saved configuration, click the ‘Load’
button. Highlight the name of the configuration that you wish to recall, and click ‘OK’.
Those settings will now appear in the Delta Control Panel and the driver will
automatically update the hardware.
H/W INSTALLED: Up to four Delta series cards may be installed in a PC system
simultaneously (Note: On the Drivers CD, see the “Multi-card Installation” readme file).
This section displays all installed Delta cards including the Audiophile, and allows you to
select which particular card is under the control of the control panel software. To select a
card for configuration, click the radio button to the left of that particular card in the “H/W
Installed” list. Because of a space restriction, the Audiophile appears abbreviated as “AP”
in this list.
ON THE MAC: To save your Delta Control Panel settings, go to the File menu and select