M-Audio Evolution UC-33 Getting Started Manual - Oms Setup
Evolution UC-33e Getting Started
8
1.
Click and drag the USB Drivers Installer from the OS 9 window it is currently
in, to the desktop.
2.
Double click on the icon. If a window appears, click ’Open’.
3.
Double click on the newly created USB Drivers Installer on your desktop.
4.
Click ’Install’.
The installer automatically places the drivers in the correct system folders.
6.
Once the installer has finished installing the drivers, click ’Restart’.
7.
Switch on the UC-33.
You now have to run the OMS Setup program:
1.
Open the Hard Drive, then the ’Opcode’ folder, the ’OMS Applications folder’,
and then ’OMS Setup’.
2.
If you get a message to switch Appletalk on or off, choose either options.
This will make no difference to the OMS Setup.
3.
In the next window, click ’OK’.
4.
Click ’Search’.
5.
Click ’OK’
6.
Then ’OK’ again.
7.
Click ’Save’.
8.
If it asks you, click ’Replace’.
You should now have a final window showing your current Studio Setup.
If ’Quicktime Music’ is crossed out, you should double click on it, then click in the ’on’
circle to enable it. Then click ’OK’.
You’re ready to go. Now just make sure your UC-33 is selected as the MIDI input in your
music software.
You can also use a mains adapter (not included) with the following specification: 9V DC
output, 250-300mA, centre positive.
Make sure you are not powering the UC-33 already via USB, then simply plug in the
power supply to the socket labelled DC 9V (16) and switch the power on (15).
Note: Do not leave the adapter plugged in for long periods of time if the unit is not in use.
Installing The UC-33 OMS Driver
OMS Setup
Using An External Power Supply
33
Evolution UC-33e Getting Started
Pour utiliser le preset FM-7, vous devez charger un fichier de configuration dans le FM-7.
1. Lancez votre instrument FM-7.
2. Passez en section Master du FM-7.
3. Cliquez sur "Load" dans la fenêtre de définition du contrôleur du FM-7.
4. Localisez le dossier "UC-33 Application Files" sur le CD-ROM
d'installation Evolution.
5. Sélectionnez le fichier UC33.f7c
6. Pressez le bouton de fonction (7) "Recall" sur l'UC-33.
7. Tapez "19" sur le pavé numérique.
Une des cartes de sons les plus répandues est la SoundBlaster de Creative Labs. Vous
pouvez en avoir une déjà installée sur votre PC sans savoir quelle puissance elle recèle.
Il n'est pas nécessaire d'accéder à tous les paramètres disponibles, mais une fois en-
core, nous avons fait le plus dur pour vous. Voici comment obtenir que l'UC-33 fonc-
tionne instantanément avec votre SoundBlaster:
1. Pressez le bouton de fonction (7) "Recall".
2. Saisissez "30" sur le pavé numérique (4).
Cela sélectionne la configuration SoundBlaster sur l'UC-33.
3. Lancez votre séquenceur MIDI et sélectionnez une piste MIDI.
4. Assurez-vous de régler la sortie de votre piste MIDI sur "SB Live! Synth"
ou "SB Audigy Synth".
5. Jouez sur votre clavier tout en bougeant n'importe quel fader ou
commande sur l'UC-33 (1-4).
L’UC-33 télécommande les paramètres de filtrage et de son de la carte SoundBlaster à
l'aide de quelques unes des options de programmation étendues de l'UC-33.
Cubase et Nuendo ont des options de commande très complètes aussi avec l'U-Control
pourrez-vous piloter virtuellement tout aspect de votre programme Steinberg favori.
Toutefois, la façon la plus simple de démarrer est bien sûr d'utiliser nos configurations
pré-programmées.
Mixage multi-piste et réglages de voie avec un logiciel Steinberg
1. Lancez d'abord votre application Steinberg.
2.Allez dans le menu Devices (dans Cubase VST, il s'agit d'"options") et
sélectionnez "Device Setup".
3.Sélectionnez "Generic Remote"
4.Sur le côté droit de la fenêtre qui apparaît, cliquez sur "Importer".
5. D'abord insérez votre CD d'installation Evolution.
6. Trouvez le fichier nommé UC-33 SX Multichannel and channel strip.xml dans
le répertoire UC-33 Application Files/Cubase et cliquez sur "Open" (Ouvrir).
7. Sélectionnez maintenant la MIDI IN dans la fenêtre Generic Remote.
8. Sélectionnez le pilote UC-33.
FM-7 Native Instruments
Pour tirer plus de votre SoundBlaster