M-Audio NRV10 User Manual - page 14

NRV10 User Guide         

|

         14

The Hardware page provides access to various hardware and driver settings and information. 

Sample Rate Detected – This is a display-only value which shows the current incoming sample rate, per settings provided by 

your host computer and DAW software.

ASIO/WDM Buffer Size (Windows only) – In this fi eld, you can select the buffer size you wish to work with. Smaller 

buffer sizes result in lower latency (the time it takes for your input signal to pass through your audio software and appear at the 

outputs), but may not function well with slower systems. The default buffer size setting is 256. This setting may adequately serve 

your purposes, but if you wish, you can experiment with lower settings. If you experience stuttering or crackling in your audio 

playback, try using a larger buffer size.

NOTE: On the Mac, buffer size adjustment is set within your DAW software.

Core Audio Device Settings (Mac OS X only) – The NRV10 can be supported as two different types of devices under 

Mac OS X: a single multi-channel device, or a set of multiple stereo pair devices.

Checking the “show NRV10 stereo pairs as devices” box will confi gure the NRV10 as a set of multiple stereo pair devices. 

Unchecking this box will confi gure the NRV10 as a single multi-input device.

About Page

The About page shows the current versions of the driver being used, the control panel, as well as the fi rmware version within the 

NRV10. 

Clicking the “updates,” “support” or “F.A.Q.” boxes will open a web browser and connect you to the appropriate page on the 

M-Audio website (if your computer is online).