M-Audio Portman 2x4 Manual - page 8
8
13. In order for Windows to complete the new driver installation, you will
be required to exit and restart Windows. Select the
ton to do so.
14. Windows will restart.
IMPORTANT: With Windows 98 make sure to click on the “Enable Driver”
box. If you fail to do this the PORTMAN 2x4 driver will not be enabled.
Windows 95 Driver Installation
1. Select “Add New Hardware” from the Control Panel. Press the
“Next>” button.
2. Click radio button “No” because you do not want Windows to search
for new hardware. Click on “Next>”.
3. Scroll down in the box and select “Sound, video and game controllers”.
Click on “Next>”.
4. Click on “Have Disk...”.
5. Insert the factory supplied driver disk in Drive A: and click on “OK”.
6. Select the Midiman PORTMAN 2X4 driver from the list box and click
on “OK”.
7. Click on “Finish”. Windows will copy the driver files.
8. Check the “Enable Interface” box and select the proper Port Address
and IRQ settings that match the actual hardware settings of your com-
puter’s printer port.
Typically, LPT1 will be address 3BCh or 378h on a desktop computer.
Also typically, if LPT2 is installed, it will be at address 278h. Usually
LPT1 uses IRQ7 and LPT2 uses IRQ5. You may also select other “non-
standard” IRQs if required to do so — checking the “Use Custom
Port/IRQ” checkbox will make “non-standard” IRQs available for dri-
ver use.
If you are unsure of what your Port Address is, please see the section in
this manual titled “About Your Printer Port,” or consult your comput-
er’s owner’s manual.
9. Once the Port Address and IRQ are selected, press the
10. In order for Windows to complete the new driver installation, you will
be required to exit and restart Windows. Select the
ton to do so.
10. Windows will restart.
IMPORTANT: With Windows 95 make sure to click on the “Enable Driver”
box. If you fail to do this the PORTMAN 2x4 driver will not be enabled.