M Design INTERRA 60 Installation Manual - page 4
INSTRUCTION FOR INSTALLATION AND USE 60-68-74
4
1
GENERAL
This fireplace is a product based on a closed combustion system. It is designed to create a
pleasant atmosphere and comfort in your living room. It is an efficient heating system that
creates the impression as if you were in front of a real pen fire. Fireplaces with GAS
combustion are based on the principle of natural chimney draft. For this system is needed to
use two concentric pipes. The inner pipe ensures flue and outer pipe is used to supply air for
combustion. The advantage of this principle is that the device does not need any aor from the
room and it operates independently of the house climate.
1.1
TRANSPORT AND INSTALLATION
The INTERRA is transported in a horizontal position or if there are some problems – in
angle-wise 45°. At first unscrew screws from the pallets. (see pic.1).
You can use transport holders (optional) (see pic.2). For transport fix then on the both sides
of the fireplace.
OTVÁRANIE A ZATVÁRANIE DVERÍ
Pic. 1
Pic. 2
OPENING AND CLOSING OF THE DOOR