M-LOCKS Straightbolt EM3520 Mounting Instructions - Functional Test
6
www.m-locks.com
5
FUNCTIONAL TEST
Check the keypad
If the lock does not react, follow the procedure below to check that your keypad is working.
Press and hold key ‘5’ until you hear a double tone. The LED will illuminate when performing the fol-
lowing actions:
5
Next, press all of the keys one by one and one after the other.
1
2
3
4
5
6
7
8
9
0
If the key = OK
If the key = not OK , the test will be aborted.
If one or more keys do not operate properly, please contact your supplier.
Mechanical Test
• Enter code (1,2,3,4,5,6). The lock emits a double signal for the correct code.
• Turn keypad/knob clockwise until stop. Lock bolt must move freely.
• Boltwork / door can be opened.
Repeat the mechanical test (opening / locking) several times before closing the safe door!
6
DATASHEET
EM3520 / EM3520 S
EM3550 / EM3550 S
EM3550 AB
Opening
Manually
Manually
Manually
Locking
Manually
Manually
Manually
Blocking element
Motor
Motor
Motor
Mounting dimensions
Standard
Standard
Standard
Possible mounting positions
4
4
4
EM3520 / EM3520 S
EM3550 / EM3550 S
EM3550 AB
Power supply
9V Alkaline Duracell, Industrial- or Energizer battery
Software
Codes
2 (6 digits)
Up to 10 (6 or 7 digits)
Up to 10 (6 or 7 digits)
Manager Codes
1
1
1
User Codes
1
Up to 9
Up to 9
Time delay / open window
01-99 Min / 01-19 Min
01-99 Min / 1-19 Min
01-99 Min / 1-19 Min
Battery low signal
Ja
Ja
Ja
Dallas Key and code
-
Dallas Key and code
Dallas Key and code
Silent alarm
-
Silent alarm
Silent alarm
Dual mode
-
Dual mode
Dual mode
Audit 2000 Events
with Date & Time
-
-
With AB3000
Manipulation protection
5 minute lockout after 4 consecutive wrong codes