M.T.H. Tinplate 840 Operator's Manual - Assembly
Tinplate 840 Powerhouse
5
Assembly
The water tower is attached to the
roof using tabs and slots. The
location of the tabs and slots are
keyed.
1. Locate the slots on the roof and
align the tabs on the water tower.
2. Carefully insert the tabs down
into the slots.
The number 840 Powerhouse can be
lifted and set into the green base. If
you elect to use the base, the stairs
can be attached by aligning the pins
on the underside of the stair
assembly to the round holes in the
base.
Water Tower
Base and Stairs
Skylights
Two removable skylights provide
access to spaces originally intended to
hold a transformer. The skylights can
be installed or removed by sliding the
skylight toward the front or rear of the
840 Powerhouse.
The skylights must be oriented with
the bumps on their edges aligned with
the slots on the roof.