M-View OnCall Wi-Fi Pro User Manual - page 3
Wearing the Oncall Camera
The mounting clip supplied with the camera can be rotated
360° to allow mounting on a variety of garments.
It is recommended that the camera is mounted upright for
best recording result.
Examples of the flexibility of the mounting clip
Removing the Mounting Clip
1. With the back of the camera facing you, rotate the clip
clockwise so that the middle of the top of the clip (the
widest end) is lined up with the top-right corner of the
camera.
2. Slide the clip downwards in a straight line from the top-right
to the bottom left corner of the camera. The clip should
slide off its mounting stud.
3. To replace or swap the clip with a different sized clip,
simply line up the hole in the back of the new clip against
the mounting stud and reverse the movements described
above. Push the clip onto the stud until it stops to ensure it
is securely mounted.
• 1
2