M2M Pro User Manual

Other manuals for Pro: User Manual

Summary of Pro

  • Page 1

    M2m pro router user manual (shortened version) _____________________________________ rev: 1.1.1 2010-10-13.

  • Page 2: Document Specifications

    2 document specifications this documentation belongs to the m2m pro router device which was made by wm rendszerház kft. The user manual includes the description of the device’s architecture, construction, interaces, functionality with the installation-steps and required configuration setup for the p...

  • Page 3: Contents

    Contents chapter 1. Introduction .............................................................................. 4 1.1 product overview ........................................................................................... 4 1.2 main features ........................................................

  • Page 4: Chapter 1: Introducing

    4 chapter 1: introducing thank you for choosing the m2m pro router device for your business. 1.1 product overview m2m router pro is an advanced, programmable modem device which has numerous additional functions (hardware and software). These possibilities make the device suitable for ensuring the co...

  • Page 5

    5 1.2 main features hardware and functional properties high-capacity, powerful amr9 microprocessor (180 mhz clock speed, 200 mips) mobile service provider- independent usage supported – you can choose the option to handle two different providers’ mobile sim cards at the same time (dual, paralell sim...

  • Page 6

    6 gprs/edge/3g/hsdpa module connection possibility – for the offered interfaces by wmr (option): - 80-pin board-to-board connector: high-capacity siemens cinterion eu3-e (hsdpa) module supported - pci express connector (for industrial environments): option gtm-380 hso board-to-board interface module...

  • Page 7

    7 possibility of run unique application software (for ex. Modbus tcp master, modbus rtu rs485 or rs232 interface, m-bus master)  data query, store; data sending recurring in cycles – this affects in any case of changes ont he mobile network or through the ethernet interface mapping modbus registers...

  • Page 8

    8 configuration properties through serial/ethernet port remotely from the mobile network-side.

  • Page 9

    9 chapter 2. Device construction the router device is an industrial computer which was build in a roboust aluminium case. Includes a high-capacity, powerful arm9-based microprocesor (180mhz clock speed), which runs a customized linux operation system (made by wmr ) – what loads and supervises the pr...

  • Page 10

    10 circuit – upper side 12 – jumper switch option (debug port/serial port) 13 - ethernet connector extension (iee 802.3, 1 x 10/100m auto-negotiation lan/wan rj45 port) 14 – status led extension (bicolor: red/green) 15 – serial port connector extension (dsub-9 (rs232)) 16 – power supply connector ex...

  • Page 11

    11 6 - usb 2.0 connector extension circuit – bottom side microcontroller properties processor: atmel arm-based mcu processor type: arm 9 (at91rm9200), 256-pin connector processor clock speed: 180 mhz (200 mips) processor data: 16 kbyte data cache, 16 kbyte instruction cache, write buffer, 24.4ma, 16...

  • Page 12

    12 2.2 interface options front-side connectors 1 – 2 x usb 1.1 host connector for usb device socket 2 – micro-sd card socket 3 - antenna sma connector 4 – gsm network response leds (colours: green, red; signal: gprs/3g) 5 – interface connector socket (rs485, mbus (for ex. Calorimeter)) 6 – case fixi...

  • Page 13

    13 back-side connectors 1- 10/100 mbit/s ethernet connector (iee 802.3 lan/wan rj45 port) 2 – status led (bicolor: red/green; signal: pwr/lan/wlan) 3 – mini-usb 2.0 connector for mini-usb device socket 4 – serial port i/o socket (dsub-9 (rs232)) 5 – configuration reset button (under dsub-9 connector...

  • Page 14

    14 2.3 optional module extensions there are more option to swith an additional hsdpa or edge module to the router. This hardware upgrade process and the further software implementation and programming will be handled by the wmr rendszerház . You only need to make your choice among the module standar...

  • Page 15

    15  siemens cinterion eu3 -e (hsdpa module) features 80-pin board-to-board connection integrate-operability module, programmeble at interface and standard modem device emulation high-speed usb 2.0 (480 mbit/sec) high speed hsdpa: 3.6 mbps downlink/384 kbps uplink (parallel) multimode: hsdpa/umts/gp...

  • Page 16

    16 csd v.110, rlp, non-transparent (9.6 kbps) sms (point-to-point mt + mo, cell broadcast, text /pdu) fax (group 3 class 1) software properties: programmable: at-hayes, 3gpp ts 27.007 and 27.005, cinterion wireless modules instruction set sim appl. Toolkit: sat release 99 tcp/ip stack audio (codecs:...

  • Page 17

    17 2.4 technical reference technical design and construction m2m-pro dimensions: 150 x 35 x 78mm nyÁk dimensions: 147 x 74mm modul dimensions (optional): 80-pin connector: siemens cinterion eu3-e: 33.9 x 44.6 x 5 mm pci express connector: option gtm380: 51 x 30mm case: made from abp800 aluminium pla...

  • Page 18

    18 power consuption – router device primer side: 230 v power supply range: 8-32 vdc (low voltage) intensity (stand-by power cons.): 90 ma (offline modem state) intensity (average power cons.): 150 ma intensity (max. Power cons..): 300 ma power consuption / output capacity: 9.6 w (max.) electric shoc...