MACCHIAVALLEY Tasman-Denali Installation And Use Manual - page 9
LB. 00151-00-GB
Pag. 9
02/08/06
COFFEE, CAPPUCCINO, MILK DISPENSING
1) Machine configurations Standard
The display shows:
SELECT DRINK
Place a cup under the adjustable in height coffee dispenser, and press the dose key required.
The display shows:
XXXXXX
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
where “XXXXXX” indicates the selected dose key name.
The cursor indicates the amount of drink being dispensed.
WARNING:
a)
Pressing the same key during dispensing can stop the selected dose.
In case of a milk-based dose, press twice to stop dispensing; press onc e to stop milk dispensing, and once to stop coffee dispensing;
the sequence depends on the type of dispensing.
b) Is possible delivery long drink ( Jug ) if in “ Dose Programming “ the parameter “ Repetition cycles ” has been programmed with a
number of cycles over 1 (maximum value is 9)
When the dose key with a number of “ Repetition cycles “ over 1 is pressed ; the display shows:
XXXXXX
Y
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
Where :
“XXXXXX” indicates the selected dose key name.
Y indicates the number of cycles that the machine will automatically carry out for the dose you will select.
The cursor indicates the amount of drink being dispensed.
WARNING:
a)
If you want to stop the automatic repetition cycles, press the same selected button.
b)
This function is not enabled for the decaffeinated cycle.
c)
This function is not enabled for self machine, self machine with credit card, self machine with coin mechanism, and for self with credit
card + coin mechanism.
2) Machine configurations with waiters’ card.
The display shows:
INSERT CARD
Insert the smart card into the proper slit, the display shows in order:
SELECT DRINK
WAITER XX
Where XX indicates the number of the inserted waiters’ card.
Place a cup under the adjustable in height coffee dispenser, and press the dose key required.
The display shows:
XXXXXX
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
where “XXXXXX” indicates the selected dose key name.
The cursor indicates the amount of drink being dispensed.
WARNING:
a) Dispensing is enabled only when the smart card is inserted.
b) The number of carried out dispensing is saved in the counter relevant to the inserted card.
c) Pressing the same key during dispensing can stop the selected dose.
d) In case of a milk-based dose, press any key twice to stop dispensing; press once to stop milk dispensing, and once to stop coffee
dispensing; the sequence depends on the type of dispensing.