Mace HydroMace 3000 Product Manual - page 24
38
SeCtion b SoFtware Manual
RetuRn to toC
MaCe HydRoMaCe 3000 Product Manual 39
RetuRn to toC
2. The “Channel name” dialogue box will
appear. Enter a channel “Name” in to the text
field (16 character maximum). This “name” will
also be displayed on the HM 3000 main LCD if
enabled. Click “Continue”.
1. Select the “Velocity” channel type from the “New
channel” dialogue box and click “Continue”.
21.1.2 Add a “Velocity” channel type - I/O card (Frequency)
3. In the “New channel” dialogue box highlight
the “I/O Module” option from which the named
channel will receive its value. Click “Continue”
and a new dialogue box will appear with the
available input types listed.
NOte: as a particular module’s input becomes fully utilised the module
will not appear on the “Select module” list.
4. Select the “Frequency” input type from the
“I/O Module @ 2” list. Click “Continue” and then
select the appropriate input from which the
named channel will receive its value.
NOte: as a particular module’s inputs are utilised the input will
not appear on the “I/O module” list. In the example above, the
“Digital input #1” will no longer be available.
5. In this example the channel named “Velocity
Freq” will be calculated using a sensor attached
to “I/O Module @ 2” on “Digital input #1”. Click
“Continue” to complete the new channel. The
“Configure channels” dialogue box will re-appear
with the new channel listed.
2. The “Channel name” dialogue box will
appear. Enter a channel “Name” in to the text
field (16 character maximum). This “name” will
also be displayed on the HM 3000 main LCD if
enabled. Click “Continue”.
3. In the “New channel” dialogue box highlight
the “I/O Module” option from which the named
channel will receive its value. Click “Continue”
and a new dialogue box will appear with the
available input types listed.
NOte: as a particular module’s input becomes fully utilised the
module will not appear on the “Select module” list.
4. Select the “4-20mA” input type from the “I/O
Module @ 2” list. Click “Continue” and then select
the appropriate input from which the named
channel will receive its value.
NOte: as a particular module’s inputs are utilised the input will
not appear on the “I/O module” list. In the example above, the
“4-20ma input #2” will no longer be available.
5. In this example the channel named “Depth
4-20mA” will be calculated using a sensor
attached to “I/O Module @ 2” on “4-20mA input
#2”. Click “Continue” to complete the new
channel. The “Configure channels” dialogue box
will re-appear with the new channel listed.
1. Select the “Depth” channel type from the “New
channel” dialogue box and click “Continue”.
21.1.3 Add a “Depth” channel type - I/O card (4-20mA)