Mace MVR-SQ-40 Series Quick Start Manual - page 8
1.4.2 MVR-SQ-40
MVR-SQ-40 rear panel is shown as below. See Figure 1-3.
Figure 1-3
Please refer to the following chart for detailed information
1
Video input
2
Audio input
3
Video CVBS output
4
Audio output
5
Network port
6
USB port
7
Video VGA output
8
RS232 port
9
Alarm input/alarm output/RS485 port
10
Power input port
11
Power button
2.6.1 BASIC OPERATION
2.6.1.1 Playback Operation
There are various search modes: video type, channel number or time. The system can max
display 128 files in one screen. You can use page up/down button to view if there is more
than one page. Select the file name and double click mouse (or click enter button), you can
view file content.
2.6.1.2 Playback Mode
There are two playback modes: 4-ch and all-channel. In 4-ch playback mode, you can select
the 1/2/3/4-ch playback according to your requirement. In all-channel mode, the system can
playback in full channels. Please note the 4-ch has no all-channel playback mode.
2.6.1.3 Time Specific playback
Input time (h/m/s) in the time column and then click playback button, the system can operate
time specific playback.
2.6.1.4 Synchronized playback function when playback
During playback process, click numeral key, system can switch to the corresponding channel
video of the same time.
2.6.1.5 Digital zoom
When the system is in full-screen playback mode, drag your mouse on the screen to select a
section and then left click mouse to activate digital zoom. You can right click mouse to exit.
2.6.1.6 File backup and clip
System supports backup operation during search. You can draw a √ before file name
(multiple choices) then click the backup button (Button 14 in Figure 2-11).
If you want to clip a period of file, please playback the original file first. Click the (Button
15 in Figure 2-11) at the start point (that is your new file beginning point). Drag the file to the
end point (that is your new file end point) and then click the again. Click the
backup button (Button 14 in Figure 2-11) to save your current new file.
2.6.1.7 Calendar
Click calendar icon in Figure 2-11, the system pops up a calendar for your reference.
See Figure 2-12.
The highlighted date means there are recorded files on that day. You can click the blue
highlighted date to view file list.
In the following interface you can see there are video files in March 13th and 14th. Double
click the date to view file list.
Figure 2-12
7
20