Summary of BP-LBSC-010
Page 1
User manual barcode scanner ita/ eng.
Page 3
Grazie per aver scelto un nostro prodotto it ita.
Page 4: Informazioni Prodotto
Informazioni prodotto lettore codice a barre usb plug & play in grado di leggere tutti i codici a barre standard 1d qua- li upc-a, upc-e, ean-13/jan-13, isbn/issn, ean-8/jan-8, code 39, code 32, code 98, code 128, interleaved 2 di 5, industrial 2 di 5, msi/plessy e codebar. Descrizione prodotto 1 in...
Page 5: Angolo Di Lettura
Angolo di lettura - posizionare la pistola leggermente angolata rispetto al codice da leggere. - l’angolo tra codice e pistola non deve essere 90°. - lo scanner deve mirare al codice a barre e il fascio deve coprire l’intero codice a barre. Connessione della scanner connettere il cavo usb alla porta...
Page 6: Parametri Tecnici
Parametri tecnici interfaccia usb velocita’ 1200-115200 sorgente laser visibile 650nm ( national laser safety standard class 1 ) decodifica code 39, code 93, code 128, ucc/ean-128, ean- 8, ean-13, upc-a, issn+2, isbn+5, industrial 25, code32 etc.. Modalità scansione manuale, automatica, continua dis...
Page 7
Temperatura operativa 0 a 50°c / 32 a 122 °f temperatura stoccaggio umidita’ stoccaggio 20 – 85% ( in assenza di condensa ) protezione esd 15kv scariche in aria resistenza agli urti 1.5m su superfici lisce it ita.
Page 8: Settaggio Funzioni
Settaggio funzioni.
Page 9
It ita.
Page 11: Settaggio Barcode
Settaggio barcode it ita.
Page 13
It ita.
Page 15
It ita.
Page 17: Aggiungi Prefisso
Aggiungi prefisso primo step scannerizzare il codice posto in basso (questo step cancellerà il prefisso precedentemente impostato) secondo step scannerizzare il codice carattere necessario (max 10 caratteri ) esempio: per aggiungere il prefisso “mg”, scanne- rizzare il carattere “m” e “g” in ordine ...
Page 18: Aggiungi Suffisso
Aggiungi suffisso primo step scannerizzare il codice posto in basso (questo step cancellerà il suffisso precedentemente impostato) secondo step scannerizzare il codice carattere necessario (max 10 caratteri) esempio: per aggiungere il suffisso “ok”, scanne- rizzare il carattere “o” e “k” in ordine a...
Page 19: Primo Step
Nascondere caratteri iniziali primo step scannerizzare il codice posto in basso (questo step cancellerà il settaggio precedente) secondo step scannerizzare il numero di caratteri da nascondere (max 10 caratteri) esempio: per nascondere i primi 2 caratteri, scan- nerizzare il codice set-up “02” adess...
Page 20: Nascondere Caratteri Finali
Nascondere caratteri finali primo step scannerizzare il codice posto in basso (questo step cancellerà il settaggio precedente) secondo step scannerizzare il numero di caratteri da nascondere (max 10 caratteri) esempio: per nascondere gli ultimi 3 caratteri, scannerizzare il codice set-up “03” adesso...
Page 21
It ita.
Page 23
It ita.
Page 25
It ita.
Page 27
Thanks for choosing our product eng.
Page 28: Product Information
Product information this is a plug&play wired laser barcode scanner that can read all the standard 1d bar codes inluding upc-a, upc-e, ean-12/jan-13, isbn/issn code, ean-8/jan8, code 39, code 93, code 128, interle- aved 2 or 5, industrial 2 of 5, chinese postal code, msi/plessy and codabar. Housing ...
Page 29: Reading Angle
Reading angle - maintain a bevel between the scanner and the barcode to make a best reading. - do not keep the scanner in 90° with the barcode, otherwise the scanner can’t read. - the scanner must aim at the barcode and the beam must cover the whole barcode. If don’t, error maybe occur. Connecting t...
Page 30: Technical Parameters
Technical parameters interface usb baud rate 1200-115200 light source visible laser 650nm ( national laser safety standard class 1 ) decoding capability code 39, code 93, code 128, ucc/ean-128, ean- 8, ean-13, upc-a, issn+2, isbn+5, industrial 25, code32 etc.. Trigger mode manual, auto, continuous s...
Page 31
Storage humidity 20 – 85% (no-condensing) esd protection 15kv air discharge shock resistance 1.5m free on concrete surface eng.
Page 32: Function Setting
Function setting.
Page 33
Eng.
Page 35: Barcode Setting
Barcode setting eng.
Page 37
Eng.
Page 39
Eng.
Page 41: Add Prefix
Add prefix the first step scan the set-up code below (this step will clear the pre-set prefix) the second step scan the needed character code (max 10 characters ) example: to ass prefix “mg“, scan character m ang g orderly now “mg“ will be added when scanning the normal bar codes scan the above test...
Page 42: Add Suffix
Add suffix the first step scan the set-up code below (this step will clear the re-set suffix) the second step scan the needed character code (max 10 characters) example: to add suffix “ok“, scan character o and k orderly now “ok“ will be added when scanning the normal bar codes scan the above testin...
Page 43: Hide The Front Characters
Hide the front characters the first step scan the set-up code below (this step will clear the previous settings) the second step scan the number needs to be hidden (max 10 characters) example: to hide two front characters, scan the set-up code “02“ now two front characters will be hidden when scanni...
Page 44: Hide The Behind Characters
Hide the behind characters the first step scan the set-up code below (this step will clear the previous settings) the second step scan the number needs to be hidden (max 10 characters) example: to hide three behind characters, scan the set-up code “03“ now three behind characters will be hidden when...
Page 45
Eng.
Page 47
Eng.
Page 49
Eng.
Page 51
Eng.
Page 52
Mach power ® is a registered trademark all rights reserved > visit our web site www.Machpower.It.