User manual barcode scanner ita/ eng.
Grazie per aver scelto un nostro prodotto it ita.
Informazioni prodotto lettore codice a barre usb plug & play in grado di leggere tutti i codici a barre standard 1d qua- li upc-a, upc-e, ean-13/jan-13, isbn/issn, ean-8/jan-8, code 39, code 32, code 98, code 128, interleaved 2 di 5, industrial 2 di 5, msi/plessy e codebar. Descrizione prodotto 1 in...
Angolo di lettura - posizionare la pistola leggermente angolata rispetto al codice da leggere. - l’angolo tra codice e pistola non deve essere 90°. - lo scanner deve mirare al codice a barre e il fascio deve coprire l’intero codice a barre. Connessione della scanner connettere il cavo usb alla porta...
Parametri tecnici interfaccia usb velocita’ 1200-115200 sorgente laser visibile 650nm ( national laser safety standard class 1 ) decodifica code 39, code 93, code 128, ucc/ean-128, ean- 8, ean-13, upc-a, issn+2, isbn+5, industrial 25, code32 etc.. Modalità scansione manuale, automatica, continua dis...
Temperatura operativa 0 a 50°c / 32 a 122 °f temperatura stoccaggio umidita’ stoccaggio 20 – 85% ( in assenza di condensa ) protezione esd 15kv scariche in aria resistenza agli urti 1.5m su superfici lisce it ita.
Settaggio funzioni.
It ita.
Settaggio barcode it ita.
It ita.
It ita.
Aggiungi prefisso primo step scannerizzare il codice posto in basso (questo step cancellerà il prefisso precedentemente impostato) secondo step scannerizzare il codice carattere necessario (max 10 caratteri ) esempio: per aggiungere il prefisso “mg”, scanne- rizzare il carattere “m” e “g” in ordine ...
Aggiungi suffisso primo step scannerizzare il codice posto in basso (questo step cancellerà il suffisso precedentemente impostato) secondo step scannerizzare il codice carattere necessario (max 10 caratteri) esempio: per aggiungere il suffisso “ok”, scanne- rizzare il carattere “o” e “k” in ordine a...
Nascondere caratteri iniziali primo step scannerizzare il codice posto in basso (questo step cancellerà il settaggio precedente) secondo step scannerizzare il numero di caratteri da nascondere (max 10 caratteri) esempio: per nascondere i primi 2 caratteri, scan- nerizzare il codice set-up “02” adess...
Nascondere caratteri finali primo step scannerizzare il codice posto in basso (questo step cancellerà il settaggio precedente) secondo step scannerizzare il numero di caratteri da nascondere (max 10 caratteri) esempio: per nascondere gli ultimi 3 caratteri, scannerizzare il codice set-up “03” adesso...
It ita.
It ita.
It ita.
Thanks for choosing our product eng.
Product information this is a plug&play wired laser barcode scanner that can read all the standard 1d bar codes inluding upc-a, upc-e, ean-12/jan-13, isbn/issn code, ean-8/jan8, code 39, code 93, code 128, interle- aved 2 or 5, industrial 2 of 5, chinese postal code, msi/plessy and codabar. Housing ...
Reading angle - maintain a bevel between the scanner and the barcode to make a best reading. - do not keep the scanner in 90° with the barcode, otherwise the scanner can’t read. - the scanner must aim at the barcode and the beam must cover the whole barcode. If don’t, error maybe occur. Connecting t...
Technical parameters interface usb baud rate 1200-115200 light source visible laser 650nm ( national laser safety standard class 1 ) decoding capability code 39, code 93, code 128, ucc/ean-128, ean- 8, ean-13, upc-a, issn+2, isbn+5, industrial 25, code32 etc.. Trigger mode manual, auto, continuous s...
Storage humidity 20 – 85% (no-condensing) esd protection 15kv air discharge shock resistance 1.5m free on concrete surface eng.
Function setting.
Eng.
Barcode setting eng.
Eng.
Eng.
Add prefix the first step scan the set-up code below (this step will clear the pre-set prefix) the second step scan the needed character code (max 10 characters ) example: to ass prefix “mg“, scan character m ang g orderly now “mg“ will be added when scanning the normal bar codes scan the above test...
Add suffix the first step scan the set-up code below (this step will clear the re-set suffix) the second step scan the needed character code (max 10 characters) example: to add suffix “ok“, scan character o and k orderly now “ok“ will be added when scanning the normal bar codes scan the above testin...
Hide the front characters the first step scan the set-up code below (this step will clear the previous settings) the second step scan the number needs to be hidden (max 10 characters) example: to hide two front characters, scan the set-up code “02“ now two front characters will be hidden when scanni...
Hide the behind characters the first step scan the set-up code below (this step will clear the previous settings) the second step scan the number needs to be hidden (max 10 characters) example: to hide three behind characters, scan the set-up code “03“ now three behind characters will be hidden when...
Eng.
Eng.
Eng.
Eng.
Mach power ® is a registered trademark all rights reserved > visit our web site www.Machpower.It.