Summary of EB-3DP322-017
Page 2
2 rev 020817.
Page 3: Thanks
3 thanks for choosing our product prisma series industrial 3d printers inheriting the design concept of the simple to the extreme. Use it can print product quickly and easily, even if you’ve never used a 3d printer. The printer use the abs or pla to print the model, so the product are strong and dur...
Page 4
4 user-guide instructions this user guide has been carefully choreographed, divided into “setup”, “operations”, “maintenance” and “troubleshooting” sections, so that the readers can read in order. Please be sure to carefully read each part, in order to enjoy the best performance of the system. Learn...
Page 5
5 chapter1 overview 1.1 overview prisma series industrial 3d printers through the stl file into gcode document production model. The printer print product in the fol- lowing ways: through computer-controlled printing nozzle, squeeze abs or pla material that can be used to produce high-quality pro- d...
Page 6
6 1.3 tool box accessories 1 jumper cable 7 scraper knife 2 screwdriver 8 sd card 3 extrusion nozzle, hexagon screw, wrench, socket 9 masking tape 4 material shelf 10 art knife 5 tweezer 11 diagonal pliers 6 feeding tube 12 power cable chapter2 installation 2.1 take out the machine it may need two p...
Page 7
7 2.3 dismantle the model warm prompt: prisma series industrial 3d printers display panel is full touch screen resistive screen, click to confirm the content items. 1. Set down the hot bed: choose “z” axis , then click move button , fell the hot bed to a suitable height. 2. Heat the hot bed: click t...
Page 8
8 2.6 manual calibration note: before calibration, you need to dismantle the model and put new tapes. 2.6.1 enter the adjust platform interface 1. Choose “z” axis , and click reset button to raise the hot bed to the highest degree. 2.6.2 fine tune the printing platform 1. Let the hot bed rise to max...
Page 9
9 when printing bottom layer, observe the print nozzle .If the material can not be pasted on the hotbed, you need to adjusting nut coun- terclockwise. If the tape was broken, you need to adjust the nut clockwise. The best print state is that the material paste on hot bed is like flat ribbon rather t...
Page 10
10 3.2 operation and printing parts 1. Stick the tape to the printing plate ( note to swipe air bubbles ) 2. Insert the sd card 3. Double click “sd” icon on the display panel, enter into sd card content. 4. Choose the gcode document , click printing icon, prisma series industrial 3d printers will pr...
Page 11
11 chapter4 general maintenance 4.1 daily preventive maintenance 1. After the completion of each production, cleaning the printing plate and all of accumulated materials with lead screw. If not, can cause the printing platform is not in a horizontal position, or stuck at the printing platform in its...
Page 12
12 chapter5 trouble removal without power 1. Verify whether the power cord is firmly inserted. 2. Turn on the power switch, whether the power switch is on or not. 3. Verify whether the ac wall socket is provided or not. Not extruded material materials may be stuck in the nozzle, please refer to 、500...
Page 13
13 note.
Page 14
14.
Page 16
16.