Mach Power EB-3DP322-017 User Manual - page 5
5
CHAPTER1
OVERVIEW
1.1
Overview
PRISMA Series Industrial 3D Printers through the stl file into gcode document production model. The printer print product in the fol-
lowing ways: through computer-controlled printing nozzle, squeeze ABS or PLA material that can be used to produce high-quality pro-
duct. Cura is the pretreatment software when the WindowsXP, WindowsVista, Windows7, Windows8 or Windows10 run on the platform.
PRISMA Series Industrial 3D Printers product dimensions and sizes can be made as follows. Materials available for each material
carrier is equipped with 1000g, enough to make about 120 hours in a row without having to reload, and you can add a second material
to extend time.
Model
Product dimensions (W×D×H)mm
The size can be made (W×D×H)mm
EB-3DP322-017
520×410×665
300×200×200
EB-3DP325-018
520×410×965
300×200×500
PRISMA Series Industrial 3D Printers have functions of resume printing with power off and resume printing with filament used out,
which can greatly save the client’s losses.
Continue printing with power off: please open the UPS switch when machine is printing, if power off, the machine will pause prin-
ting, the storage battery will keep printing condition for 24 hours, after power apply the machine can continue to print automatically.
Special remind: without power supply , you’d better not click continue to print, because ups can’t supply too long time, and Run out
of electricity will reduce battery working life.
Continue printing with filament used up: if the filament is used up when printing, the machine will automatically pause to print while
detect no material, only after new filament apply can you continue to print.
1.2
Front, side and back view
1
Material shelf
6
UPS switch
2
Print Nozzle
7
Power Socket
3
SD card slot
8
Display panel
4
USB port
9
Print platform
5
ON/OFF Button