Mach TX112 mk II User Manual

Summary of TX112 mk II

  • Page 1

    Tx series user manual.

  • Page 2

    © 2000 martin professional a/s, denmark. All rights reserved. No part of this manual may be reproduced, in any form or by any means, without permission in writing from martin professional a/s, denmark. Printed in denmark..

  • Page 3

    3 d e s i g n c o n c e p t the tx line from mach is a complete series of professional speakers that borrows may design features from the larger mach speakers. The speakers in the tx line deliver clean, loud, and dynamic sound in a rugged, easy to handle package. Features include a heavy 1.5 mm stee...

  • Page 4

    4 always use high quality speaker cables. Poor cables reduce sound quality and degrade speaker and amplifier reliability. Please refer to the following table for recommended cable lengths. F l y i n g t h e s p e a k e r s warning! Rigging the speakers shall be done by qualified personnel only. The ...

  • Page 5: Tx1 5F, Tx2 15 F

    5 if this happens, the compression driver has reached its maximum power handling level. Do not increase the high frequency level on the eq or the tone control on the mixer. This may damage the compression driver. If higher output is required, more or larger speakers are required. When volume is decr...

  • Page 6

    6 s p e c i f i c a t i o n s tx112 mk ii tx12f tx15f tx215f txs18 woofer 12” 12” 15” 2x15” 18" compression driver 1” 1” 1” 1” - power handling (rms) 200 watt 250 watt 350 watt 500 watt 350 watt power handling (program) 400 watt 500 watt 700 watt 1000 watt 700 watt sensitivity (1w/1m) 96 db 96 db 97...