Mach TX112 mk II User Manual - Tx1 5F, Tx2 15 F
5
If this happens, the compression driver has reached its maximum power handling level. Do not
increase the high frequency level on the EQ or the tone control on the mixer. This may damage
the compression driver. If higher output is required, more or larger speakers are required.
When volume is decreased and current returns to a safe level, the protection circuit
automatically restores full signal to the horn, and the audio output returns to normal.
C
R O S S O V E R
W I R I N G
The crossover is wired as shown.
TX1 5F, TX2 15 F
• Red (Woofer +) to LOW P
• Black (Woofer -) to LOW -
• Orange (Tweeter +) to HIGH P2
• Blue (Tweeter -) to HIGH P1
• Jumper between HP and HP
TX1 2F
• Red (Woofer +) to LOW P
• Black (Woofer -) to LOW -
• Orange (Tweeter +) to HIGH P1
• Blue (Tweeter -) to HIGH P2
• Jumper between HP and HP
black
blue
red
orange
black
orange
red
blue