1. DL manuals
  2. Mackenzie
  3. Recording Equipment
  4. MacFi-se
  5. Enhanced Operation Addendum

Mackenzie MacFi-se Enhanced Operation Addendum

Other manuals for MacFi-se: User Manual

Summary of MacFi-se

  • Page 1

    12 3. Creating an mp3 file with sound recorder run the sound recorder application (typically in start> programs> accessories> entertainment) that is supplied with windows. Record a file from the mic or line in of your sound card by pressing the round red button, or open an existing file by selecting...

  • Page 2

    2 table of contents 1. Macfi-se enhanced features ....................................................................... 3 1.1 serial communication(rs-232) ......................................................................... 3 1.1.1. Physical connection and protocol ..............................

  • Page 3

    10 1.1.24. Upload file - uld this command configures the macfi-se to send a file via ymodem to another controller or computer. Syntax; uldmsgnumber where; msgnumber = 1 - 99. Example; uld2 initiates upload sequence for message 2. After command is executed, an ymodem transfer of the file should also ...

  • Page 4

    4 command list cmd options description bas [ set message bass level. Bbt *memory bad blocks test. Cfg *restore default configs. Dir directory of message priority. Del [] *delete message. Dld [] download mpg message. Dly [] (+=sec, -=min) delay before 1st play start. Lst this commands listing. Pas []...

  • Page 5

    8 1.1.16. Record- rec this command is to used to record new messages or replace existing messages in the macfi-se . The record command can be open ended, meaning that the recording is started with this command but must be stopped using the stop command or the time constraint. Syntax; recmsgnumber,de...

  • Page 6

    6 1.1.10. Delay before play - dly this command configures the delay before first play value. This setting only effects start triggers generated on connector 1. Syntax; dlyvalue where; value = (+) 1 thru 99 for seconds, (-) 1 thru 99 for minutes. (default = 0) example; dly+5 configures delay before f...