Mackie C4 Pro Quick Start Manual - Need Help?
Quick-Start Guide
Quick
-Star
t Guide
Need Help?
• Visit www.mackie.com and click Support to find:
FAQs (Frequently Asked Questions), manuals, addendums, and
user forums.
• Email us at: techmail@mackie.com.
• Telephone 1-800-898-11 to speak with one of our splendid
technical support representatives (Monday through Friday,
from 7 AM to PM PST).
VESA/Omnimount Mounting
The Mackie Control C4 Pro has holes in the
bottom panel for mounting to a standard VESA
wall mount or floating arm mount, using 75 mm
or 100 mm mounting patterns. These holes accept
M4 (4 mm) screws. The length of the screw will
vary depending on the thickness of the mounting
plate. The screw length is calculated by determin-
ing the thickness of the mounting plate and adding
0.25 inches to that for the threads to engage the
pemnut in the bottom of the MC C4 Pro (see figure
below).
The MC C4 Pro weighs 6.9 pounds (3.1 kg), so
be sure to select a mounting arm or plate that can
support the weight of the unit.
Many VESA mounts are de-
signed for video monitors, and
the mounting plate is perpin-
dicular to your desktop surface.
Since you most likely do not
want the MCU Pro to be mount-
ed perpindicular to your desktop, make sure your
VESA mount is flexible enough so if it can be prop-
erly adjusted for your working space.
Mounting Plate
0.153 in/3.88 mm
Thread Engagement
(8 places)
Mounting Plate Thickness + 0.25 in = length of screw
M4 (4 mm) Pemnut
(8 places)
0.469 in/11.91 mm
Clearance