Mackie Control C4 User Manual - Creating A Layout
User’s Guide
16
C4 Commander
Creating a Layout
Let's go through the process of creating a sam-
ple layout, just so you get the idea.
1. Open the C4 Commander software application.
2. Click the Edit button in the upper-right cor-
ner of the C4 graphic interface to open the
Edit window.
3. Click the Settings button in the upper-left
corner of the C4 graphic interface to open
the Settings window. Click the Instruments
tab. Select an instrument to control; the
Oberheim-Matrix 6/1000, for example. Click
the right button to add it to the list of Con-
trolled instruments.
4. Click OK to close the Settings window. The
Oberheim-Matrix 6/1000 should now appear
in the Instrument list under the Assign-
ments tab in the Edit window.
5. Click the New button next to the Layouts list
to create a new layout. It is given the default
name "Untitled."
6. Click and drag the Oberheim-Matrix 6/1000
from the Instrument list over to the first V-
Pot in the upper-left corner of the C4 graphic
interface, and release the mouse button
when the V-Pot is highlighted.