Mcu pro mcu xt pro o w n e r ’ s m a n u a l universal control surface universal control surface extender bank channel solo cycle drop replace click signal signal signal signal signal signal signal signal flip global view display modifiers automation utilities control shift option read/off write tou...
2 mackie control universal mackie c ontr ol univ ers al 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance w...
Part no. Sw0454 rev. C 10/10 ©2007-2010 loud technologies inc. All rights reserved. 3 owner’s manual owner’ s manual introduction thank you for choosing mackie for your digital audio workstation (daw) control solution. Mcu pro and mcu xt pro provide the familiar feel of analog-style mixing to the da...
4 mackie control universal mackie c ontr ol univ ers al changing modes mcu pro has three different modes of operation: 1. Mackie control (use with most daws. See appendix c on page 12). 2. Logic control (use with apple logic). 3. Hui (use with avid pro tools, including hd, le, and m powered versions...
5 owner’s manual owner’ s manual mcu pro or mcu xt pro mounting plate 0.153 in/3.88 mm thread engagement (8 places) mounting plate thickness + 0.25 in = length of screw m4 (4 mm) pemnut (8 places) 0.868 in/22.06 mm clearance for mcu pro 0.469 in/11.91 mm clearance for mcu xt pro the mcu pro and mcu ...
6 mackie control universal mackie c ontr ol univ ers al in out midi external power power 3.0a-4.0a 7.5v universal control surface extender in out midi external power power 3.0a-4.0a 7.5v universal control surface extender in main out in out in 1 2 out port 2 port 3 port 4 external control user switc...
7 owner’s manual owner’ s manual front panel although the functions of the knobs and buttons on the mcu pro will vary depending on which software application is being utilized, this section provides an overview of the control surface and a general explanation of what it can do. Note that not all con...
8 mackie control universal mackie c ontr ol univ ers al master section 9. V-pot assign these six buttons are used to assign different functions to the v-pots. These usually include pan, aux send, eq, plug-in effects, and track level. 10. Banks and channels pressing the left or right bank button jump...
9 owner’s manual owner’ s manual rear panel 17. Usb port this is the usb connection between the mcu pro and the host computer. Use the usb cable provided to connect this port to a usb port on the computer. Note: when the mcu pro is connected to a computer with the usb connection, it appears as a 4x4...
10 mackie control universal mackie c ontr ol univ ers al appendix a: key commands engaging certain switches on the mcu pro and mcu xt pro during power up perform a variety of configuration tasks. See the table below for more information. Key command function more information mode change select 1 and...
11 owner’s manual owner’ s manual appendix b: fader alignment a comprehensive fader alignment on the mcu pro and mcu xt pro is performed at the factory during quality control testing. Then, each time the unit is powered on, the faders complete a quick up-down test to verify that they are still align...
12 mackie control universal mackie c ontr ol univ ers al appendix c: software support the following table is the mcu pro compatibility chart. It shows what daw works in what mcu mode, as well as what overlay to use. Links to each daw and exisiting documents is also added for your convenience. Note: ...
13 owner’s manual owner’ s manual repair for warranty service, refer to the warranty information on page 16. Non-warranty service for mackie products is available at a factory-authorized service center. To locate the nearest service center, visit www.Mackie.Com, click “support” and select “locate a ...
14 mackie control universal mackie c ontr ol univ ers al ac power requirements power requirements 7.5v dc, 3.0a – 4.0a external ac–dc adapter 1.0a, 100 – 240 vac, 50 – 60 hz operating temperature 0˚ – 40˚c 32˚ – 104˚f input/output, usb, faders i/o midi in / midi out usb format: usb 1.1 faders: 100mm...
15 owner’s manual owner’ s manual dimensions bank channel solo cycle drop replace click signal signal signal signal signal signal signal signal flip global view display modifiers automation utilities control shift option read/off write touch latch trim cancel smpte beats enter save undo /alt name va...
16 mackie control universal mackie c ontr ol univ ers al mackie limited warranty please keep your sales receipt in a safe place. This limited product warranty (“product warranty”) is provided by loud technologies inc. (“loud”) and is applicable to products purchased in the united states or canada th...
16220 wood-red road ne • woodinville, wa 98072 • usa united states and canada: 800.898.3211 europe, asia, central and south america: 425.487.4333 middle east and africa: 31.20.654.4000 fax: 425.487.4337 • www.Mackie.Com e-mail: sales@mackie.Com.