Macpower & Tytech BOX-LNU2UXS User Manual - Safety Information
Box Office User Guide
Safety Information
Before using your Box Office, please carefully read the following paragraphs relating to the
safety issues on your device in order to extend its life.
Power on/off precautions
The Box Office remote control provides the power ON/OFF button that controls the power
status of your device when connected to the TV. It is highly recommended to switch the
unit off when not in use. In any case, the Box Office media player will switch to
stand-by mode if idle for more than 30 minutes.
When the Box Office media player switches to stand-by, it will indicate it by turning on the
System LED. To re-locate the Box Office and connect it to the computer, turn off the device
using the ON/OFF switch at the back of the device! We also recommend turning it off by
using the ON/OFF switch when not in use for a longer period of time.
Location and placing precautions
Set the Box Office up in a horizontal position and DO NOT place any other objects on top
of it. Do not place the unit on an amplifier or other equipment that can become hot, as the
device itself has a heat sink at the bottom.
Avoid positioning your Box Office in the following places:
• Locations with direct sunlight, next to radiators, other sources of heat, or in vehicles that
are parked directly in the sun with the windows and doors closed.
• Locations with very high temperature (more than 35° C) or humidity (more than 90%).
• Very dusty or sandy locations.
• Locations subject to vibration, shock, or with a sloping base.
Electricity and power plug
Careful attention must be paid to the following points in order to avoid operational faults
with the equipment and to prevent electric shock, fire, and injury:
• When removing the power cable from the socket, always pull on the plug and never on
the cable.
• Do not connect and remove the power cable with wet hands.
• Keep the power cable away from heaters.
• Never try to repair the power cable yourself or to modify it in any way.
• Clean dust, dirt, and etc. from the power plug at regular intervals.
• If the unit is dropped or becomes damaged in any other way, unplug the power cable.
• If the unit should emit smoke, unusual smell, or noise, switch it off and unplug the power
cable. In such cases, please contact your dealer.
• If the unit is not used for extended periods, then the power plug should be removed
from the socket.
Cables
Use only the cables supplied or recommended by your vendor in order to avoid the risk of
malfunction, electric shock, and possible interference of the device.
Page 37 / Chapter 6 - Technical Specifications