Maestro E205XT02 User Manual - page 223
MAESTRO WIRELESS SOLUTIONS
| Services
222
E SERIES | USER MANUAL VERSION 2.2.0
http://support.maestro-wireless.com
Ethernet SMS
12.3.2
Services > SMS > Ethernet SMS
This service enables the device connected on LAN to initiate an SMS using
Ethernet port
Parameters
Description
SMS Configuration
Enable
Check to enable the Ethernet SMS.
Port
Enter the default port number. The port
number range is from 0 to 65535.
To send an SMS you need to open a TCP client connection on LAN IP and
configured port. Once the connection is created, you need to issue the following
commands
To send an SMS
AT#SENDSMS=+
To read an incoming SMS
AT#READSMS=
To delete and SMS
AT#DELSMS=
The internal SMS buffer is 10 messages – meaning, 11
th
incoming SMS will be
over written on the 1
st
SMS
Sending SMS from Web Interface: You can also send SMS, read SMS and delete
SMS from the Web GUI as shown in the screenshot below