Magellan 930-0015-001 - Swivel Mount - GPS Receiver Bracket Instruction Manual - Assembly
2
Assembly
Please do not place your iPhone
®
or iPod touch
®
into the Premium Car Kit until after the Premium Car
Kit has been assembled.
Assembly
.
Assemble the Premium Car Kit as shown. Do not tighten the retaining ring.
Press the unlock button and raise the retaining arm all the way to the top.
Insert your iPhone or iPod touch into the Premium Car Kit.
Slide your iPhone or iPod touch
into the connector on the bottom of the Premium Car Kit and then gently push your iPhone or iPod
touch towards the Premium Car Kit.
Press the release button and push down on the retaining arm to lock your iPhone or iPod touch in
place.
Check for an uneven gap
Cradle holder
Retaining
Ring
The gap between the iPhone or iPod touch and
the Premium Car Kit should be even. If it is
uneven, you can slide the back support adjust
switch on the back to push out the adjustment
block until the gap at the top is the same as the
gap at the bottom. (Please note that if it is still
uneven, you will need to remove your iPhone or
iPod touch. Then pull out the adjustment block,
rotate it 180
º
and place it back in the Premium
Car Kit. This will increase the thickness of the
adjustment block.)