Magellan 930-0015-001 - Swivel Mount - GPS Receiver Bracket Instruction Manual - Mounting
3
Mounting
Before mounting the Premium Car Kit you should remove your iPhone by lifting the front tab on the
retaining arm and rotating your iPhone slightly forward.
When mounting the Premium Car Kit in your vehicle please keep these important guidelines in mind...
•
Check local vehicle laws regarding mounting devices on windshields.
•
Make sure not to mount the Premium Car Kit where it could be dislodged should your airbag
deploy.
•
Likewise, make sure that the power cable would not be dislodged should the airbag deploy.
Clean the area where the Premium Car Kit will be placed. Dry the area thoroughly before continuing.
Press the Premium Car Kit base firmly against the windshield or dash surface.
Push the suction cup arm down, locking the Premium Car Kit to the surface.
Apply Power
Connect the USB end of the power cable to the Premium Car Kit. Connect the other end of the cable to
a vehicle power receptacle.
Final Adjustment
Reinstall your iPhone into the Premium Car Kit and adjust for proper viewing.
When making viewing adjustments, always hold the assembly by the Premium Car Kit and never by the
iPhone or iPod touch.
Make any final adjustments for proper viewing and tighten the retaining ring.
Bluetooth
®
Bluetooth Pairing (iPhone)
When the Premium Car Kit is first powered on, Bluetooth is automatically set to discovery mode and
ready to pair with a new device.
Connect the Magellan Premium Car Kit to power.
In the iPhone Settings Menu, make sure Bluetooth is turned on.
Once the Searching for Devices is complete, select the “Magellan Car Kit”.
If prompted, enter the code “1234”.
Magellan Premium Car Kit will connect with your iPhone.
Pairing is now complete.
Once paired, the Magellan Premium Car Kit will automatically connect with the iPhone when it is in
range.