Magellan eXplorist 510 User Manual - page 43
Magellan eXplorist Tools
Magellan eXplorist 510 / 610 / 710 User Manual
34
Waypoint Projection
A waypoint can also be created by entering the
distance and heading for the waypoint from your
current location.
Projecting a Waypoint
1.
Tap on the Map screen.
2.
Tap on the Main Menu icon in the lower left
corner.
3.
Tap on the Waypoints icon.
4.
From the
Waypoint List
, tap on the Options
Menu button in the lower right corner.
5.
Tap on
Add Waypoint
.
6.
Tap on
Projection
.
7.
Tap on the Bearing field. Use the keypad to
enter the degrees that the projected waypoint
is from your current position.
8.
Tap on
OK
.
9.
Tap on the Distance field. (Note that you can
tap on the units of measure drop-down menu
to change the units to be used.
10.
Use the keypad to enter the distance from
your current location that you want to project a
waypoint.
11.
Tap on
OK
.
12.
Tap on
Next>
.
13.
The
Waypoint Description
page is displayed.
Make the necessary edits and tap the Disk
icon at the bottom to save.
Best Fishing & Hunting Times
This tool displays the best hunting and fishing times
for your current location.
Using Best Fishing & Hunting Times
1.
Access the Tools Menu.
2.
Tap on the
Fish & Hunt
button.
Tap on the calendar and the arrows to the left
and right of the month to select a day to view.
Sun & Moon Rising and Setting Times
This tool displays the sun and moon rise and setting
times for your current location.
Using Sun & Moon Times
1.
Access the Tools Menu.
2.
Tap on the
Sun & Moon
button.
Tap on the calendar and the arrows to the left
and right of the month to select a day to view.
Geofencing
Select the map object to create an imaginary fence
around and be alerted when you are within the
perimeter of the boundary or on the boundary.
Setting Up Geofencing
1.
Access the Tools Menu.
2.
Tap on the
Geofencing
button.
3.
Select “Add Geofence”. (If you currently have
a geofence defined, go to the Options Menu
and select “Add Geofence”.
4.
Select the map object from the list provided.
5.
Set up the geofence by turning the border
alert on or off, the proximity alert on or off, the
distance for the proximity alert and if you want
the geofence displayed on the map.
6.
The geofence will be added to the list of
created geofences. Just tap on one of the
geofences in the list to change the settings.
Alarm Clocks
Use this tool to have the eXplorist to alert you for
sunset time, sunrise time or a time that you define.
Setting the Alarm Clock
1.
Access the Tools Menu.
2.
Tap on the
Alarms
button.
3.
If there are no alarms saved, select the type of
alarm you want to add.
Use the Time Alarm screen to set a name for
the alarm, the sound used for the alarm and
the time for the alarm to be played.
Tap the ON/OFF button to toggle the current
status of the alarm.
Press the Disk icon to save the alarm.
4.
If there are alarms saved, you will be given a
list of the available alarms. Tap the left side
of the alarm button to toggle it on and off. Tap
the right side of the alarm button to modify