Magellan P6LX-ATX User Manual - Award Bios Setup
________________________________________________________________________________________
P6LX-ATX M/B Manual Page 15
AWARD BIOS SETUP
AWARD BIOS SETUP
CPU Card L1 Cache (Enabled)
This fields allow you to choose from the default of Enable or choose Disable to turn on or off the
CPU’s Level 1 built-in cache.
CPU Card L2 Cache (Enabled)
This fields allow you to choose from the default of Enable or choose Disable to turn on or off the
CPU’s Level2 built-in cache.
Boot Sequence (A,C,SCSI)
This field determines where the system looks first for an operating system. Options are A, C,
SCSI ; C, A, SCSI ; C, CDROM, A ; CDROM, C, A ; D, A, SCSI ; E, A, SCSI ; F, A, SCSI ; SCSI,
A, C ; SCSI, C, A ; C only
; LS/ZIP,C The setup default setting is to check first the hard disk and
then the floppy drive; that is A,C,SCSI.
Swap Floppy Drive (Disabled)
When enabled, the BIOS swaps floppy drive assignments so that Drive A becomes Drive B, and
Drive B becomes Drive A under DOS.
Boot Up NumLock Status (On)
This field enables users to activate the NumberLock function upon system boot.
Security Option (Setup)
This field determines when the system prompts for the password. The default setting is System,
where the system prompts for the User Password every time you boot up. The other option is
Setup, where the system always boots up, and prompts for the Supervisor Password only when
the Setup utility is called up. You can specify a password by using the Supervisor Password or
User Password option from the main screen as explained later in this section.
OS/2 Select For DRAM > 64M (Non-OS2)
When using OS/2 operating systems with installed DRAM of greater than 64MB, you need to
Enable this option otherwise leave this on the setup default of Non-OS2.