Magewell USB Capture DVI Plus User Manual - page 15
13 / 18
console / video player / another computer” section to adjust the corresponding
“Computer”and “Mic”volume.
7. To avoid video feedback when previewing the screen, users can disable the
software preview function, or minimize the software.
4.2 Typical solution for USB Capture SDI Plus
Capture signal from camera / professional video equipment
1. Connect the SDI output interface of the camera to the “INPUT” interface of the
USB Capture SDI Plus via a SDI cable.
2. Loop Through: Connect the LOOP THRU output interface to the display device via
the a SDI cable.
3. Volume adjustment for recording device: Enter the system sound recording
device interface (Start Menu>>Control Panel>>Hardware and
Sound>>Sound>>Change system sounds>>Recording). Select“SDI”and / and/or
“Line In”and click the“Properties”button to enter the property interface. Enter the
“Levels”label page to adjust volumes. You can drag the scroll bar to adjust the
volume level or click the speaker icon to mute / enable the volume.
4. The output volume can only be adjusted by the line out device itself.
5. The audio part can be set easily by using USB Capture Utility. Please refer to the
USB Capture Utility document for details.