Magic Chef mCSCd6W5 User Manual - Before Use
11
FILLING THE RINSE AID DISPENSER
The rinse aid is released during the final rinse to prevent water droplets that can leave spots and streaks from
forming on your dishes It also improves drying by allowing water to sheet off the dishes Your dishwasher
is designed to use liquid rinse aids The rinse aid dispenser is located inside the door next to the detergent
dispenser To fill, open the cap and pour the rinse aid into the dispenser until the level indicator turns completely
black The rinse aid container holds about 3 7oz (110ml)
NOTE
:
Only use branded rinse aid for dishwasher Never fill the rinse aid dispenser with any other substances
(Dishwasher cleaning agent, liquid detergent), as it may damage the appliance
You can determine the amount of rinse-aid using the optical level indicator (see below) There is a Rinse-Aid
Warning light on the control panel that will indicate when it needs to be filled You should not let it get below
1/4 full
As the rinse aid is used up the size of the black dot on the rinse aid level indicator changes, as illustrated below
ADJUSTING RINSE AID DISPENSER
The rinse aid dispenser has four settings The recommended setting is “3” If
the dishes still are not drying properly or are spotted, adjust the dial to “4”
Increase the setting if there are drops of water or lime spots on the dishes
after washing Reduce it if there are sticky whitish stains on your dishes or
a bluish film on glassware or knife blades
To open the Rinse-Aid dispenser, turn the cap counter-clockwise about 1/4 turn and lift out Pour the rinse aid
into the dispenser carefully, to avoid overfilling Replace the cap and turn clockwise to lock Be sure to wipe up
any spilled rinse aid
BEfOrE uSE
Full
3/4 full
1/2 full
1/4 full - Should refill to eliminate spotting
Empty
Rinse Aid
Indicator
figure 5
figure 6
Adjust
Lever
(Rinse)
figure 7