Magic Control Technology MULTIPOINT MWS8820 User Manual - Ulti
M
ULTI
P
OINT
™ Workstation
MWS8820
4
MINIMUM SYSTEM REQUIREMENTS
z
Available USB 2.0 Port
z
CPU – One of the following:
• x64-based Intel Pentium, Intel quad core (i7, i5, i3), XEON, Intel dual core.
• Compatible processor (MultiPoint Server supports up to four core & eight core CPUs
on one server)
Note:
1)AMD Opteron / Athlon, AMD Embed chipset is not recommend due to unstable
keyboard/mouse operation which may not recognize under USB1.1 device.
2)Intel Itanium Processor is not supported.
z
RAM – The required RAM depends on the number of Workstation is needed:
• 2 GB for 4 stations
• 4 GB for 6 stations
• 8 GB for 10 stations
z
Multi-core processor support
• Support up to 4 & 8 multi-core processors; dual-core is less powered and therefore
only 2 to 3 workstation can be supported.
z
Minimum disk space for setup
• 32 GB
OPERATING SYSTEMS SUPPORTED
For optimal multimedia performance, we recommend the following CPUs:
z
Dual-core processor: support up to 3 stations under low processing application.
z
Quad-core processor: support up to 6 stations under low processing application.
z
Core-i5 processor: support up to 6 stations under low processing application.
z
Core-i7 processor: support up to 8 or 10 stations under low processing application.
z
Windows MultiPoint Server 2011
FOR OPTIMUM VIDEO DISPLAY
Technically, short video playbacks can be supported but the operating system needs
to be
- i7 processor
- Intel Sandy bridge chipset
Note: Extended video display at full screen is not recommended; it often exhausts CPU and
force system with much lower performance.