Magic Flight SBACH342- 50cc Manual - page 3
of
12
Once all parts have been prepared, we mount the landing gear. For all subsequent work, it is advantageous if the
model stand secured on the landing gear.
The landing gear is already pre-drilled, the installation is not a problem and is self-explanatory
You need only remove the foil at the fuselage
(see pictures).
Align the tail skid so at the fuselage, from the center of rotation of the wheel and the rudder on a line is, fix the
tail skid with tape now. Next, (before) you drill and srew.
Carbon-landing gear and tail skid