As of december, 2016 service manual (new glass kettle set, model kor-2060sp).
Index page 1 ▶ product specification sheet -------------------------------------------------------------------- 2 ▶ part identification ---------------------------------------------------------------------------------- 3 ▶ exploded view ---------------------------------------------------------------...
Product specification sheet page 2.
Part identification page 3.
Exploded view page 4.
Part list page 5 \.
Technical information of operation page 6 alternatively, the kettle may be filled through the spout. The water level must be within the min and the max level. Too little water will cause the kettle switching off before the water has boiled. Note: do not fill the water over the maximum level, as wate...
Technical information of operation page 7 6. Place the carafe with hot water on the keeping warm plate, press the “on/off” button once, the appliance enters the keeping warm state, you can adjust the temperature of keeping warm by pressing temperature “+” or “-” button (the keeping warm temperature ...
Technical information of operation page 8 removal of mineral deposits your kettle should be periodically descaled as the mineral deposits in tap water may form scale on the bottom of kettle so as to cause the operation less efficiency. You can use the commercially available descaler and follow the i...
