Magic-Pro ProMini Keyboard User Manual - Basic Functions
(V1.0)
8
Note: Before the first time use of the equipment, the battery must be fully charged.
* Use the travel charger – this is optional part of this equipment, provided by required only.
1. Connect the travel charger with the device through the USB connector at left, the arrow shown on the
charger need be in the same direction of the device. like:
, then connect the travel charger with
AC power.
2. The device can be recharge via data lines which directly connect with standard USB port on the
computer.
3.1 Second later (if the battery is depleted, it would take a longer time), the charge indicator at upper left
corner of the device will light.
4. Charging is complete, unplug the charger from the AC power (or disconnect the data line from
computer) first, then remove the charger plug from the device.
Note: This device can be used when charging, but will extend the charging time;
When the electrical capacity is low, the low-voltage light will constantly flashing to warn. When the
electrical capacity will run out, the device will self closing.
4.
Basic functions
4.1. Primary Key bits
The function printed at each key is defaulted by pressing the button with one time.
4.2. sub-keys
Press the SHIFT key while using these keys, including :!,@,#,$,%,^,&,*,(,),~,|,",{,},?,_,+
4.3. deplicate keys
Press the FN key while using these keys. all these keys were printed in Blue for easy recognize.
4.4. backlit control key
As Shown:
is the key for control the backlight.
4.5. Touch Pad
The default operation direction is as
, move finger at the touch zone can do the same operation
as mouse, quickly double-tap can be achieved with the mouse double-click function. Together with the
left mouse key can drag window functionality.
Change operation direction of the touch pad: Press the
Two keys, you can change the
direction of touch panel to vertical as
, suitable for user operate the computer by one hand.
4.6. Laser Pointer