MagicalButter.com MB2e Owner's Manual - page 7
Situation
Cause
Solutions
Machine will
not start, makes
continuous
beeping sound
Not enough liquid
inside pitcher
Dirty overflow sensor*
Temperature not
selected before
Cycle Time
Blender motor starts
once extraction
temperature is reached
Pitcher filled under
MIN line or
above MAX line
Level of liquid is
above MAX line
Too much soap
added during
Clean cycle
Contact us at:
MagicalButter.com
First select Temperature;
then select Cycle Time
Wait about 15 minutes
into cooking cycle for
blending to begin
Use correct amount
of ingredients per
owner’s manual
Be sure level of contents
is below MAX line
Reduce amount of
soap used during
Clean cycle
Contact us at:
MagicalButter.com
Clean overflow sensor*
Be sure level of contents
is between MIN and
MAX lines
Blender motor
not functioning
Spillover
Other issues
*See page 4, item 10
Troubleshooting Guide
10
Balancing Nature & Technology
TM
Tips & Frequently Asked Questions
11
What is the purpose of the LED lights, and what do they tell me?
Aside from providing ambiance and a colorful light show in your kitchen,
the integrated LED display encircling the top of your MagicalButter appliance has an
important functional purpose: immediately informing you of the machine’s operating
status. The lights are strategically positioned to reflect off the ceiling during operation.
As the device is exceptionally quiet when not blending or stirring, the LED display
constantly and silently indicates that the cooking cycle is proceeding. The lights
automatically shut off, and the unit beeps, to notify you when the cycle is completed.
What does each button do?
Each button runs a preset, microprocessor-controlled cycle: grinding, heating,
extracting, and stirring. To intensify your results, simply extend your extraction time by
selecting a longer cycle. The standard cycle time for oil is 1 hour, for butter 2 hours,
and for tincture 4 or 8 hours. The Clean function has a run time of about 3 minutes.
How do I use the self-cleaning function?
First, unplug the electrical cord from the machine. Then fill the pitcher with water to a
level halfway between the MIN and MAX lines. Add dish soap about the size of a coin.
Secure the head, plug the power cord back in, and press the Clean button. After the
cycle has completed, disconnect the cord from the appliance, and carefully rinse the
remaining soap from the interior of the pitcher. NOTE: DO NOT IMMERSE, WET, OR
WASH WITH WATER ANY BLACK-COLORED PARTS OF THE MACHINE.
USE DAMP CLOTH ONLY.
For more tips and up-to-date information, please visit MagicalButter.com.
If you have a question about your MB machine, please call our
toll-free customer service number, (800) 420-4334. Please have
the model, type, and series of your MB machine handy for your
representative of TeamMB to help you more efficiently.
Customer Service