1. DL manuals
  2. Magicar
  3. Car Alarm
  4. m110as bruger
  5. User Manual

Magicar m110as bruger User Manual

Summary of m110as bruger

  • Page 1

    Thank you. Thank you for your purchase of an magicar alarm and/or remote-start sys- tem. Magicar alarms and remote-start systems are the most advanced sys- tems on the market with amazing features, incomparable ease of use, and breakthrough technologies never before used in the automotive environmen...

  • Page 2

    Two-way remote user’s guide 3 two-way remote user’s guide 4 4 5 5 6 6 9 10 11 12 14 15 16 18 19 20 20 21 22 22 23 24 25 26 27 28 29 30 30 30 30 31 32 32 32 33 33 34 36 36 37 37 38 39 40 41 41 42.

  • Page 3

    Two-way remote user’s guide two-way remote user’s guide lcd screen lcd icons remote description techinical specification before using your magicar system, please take some time to familiarize yourself with it. Front back application frequency frequency stability exterior 433.92mhz 2ppm/year 86 39 20...

  • Page 4

    On - impacts to the vehicle will be ignored by the alarm. Off - impacts to the vehicle, depending on the severity, will trigger the alarm. Alarm clock on ignition control door lock. Doors locked/unlocked. Door open. Remote start availability indication trunk open. This icon displays the signal stren...

  • Page 5

    Two-way remote user’s guide two-way remote user’s guide button functions description 0.5 sec: press shortly (between 0.5 and 1.0 sec.) : press until a car responds (longer than 2 sec.) +: press two buttons at the same time. Performing the same button functions again will toggle the various modes bet...

  • Page 6

    Two-way remote user’s guide 12 two-way remote user’s guide unlocking/disarming if the system is locked/armed, pressing button i for a half second will unlock the doors and disarm the alarm. This function will still operate even while the vehicle is remote started. The remote and vehicle will chirp t...

  • Page 7

    Two-way remote user’s guide 14 two-way remote user’s guide 13 auto mode (on/off) pressing button and for 2 sec. Will turn on auto mode. With auto mode, the vehicle will unlock/disarm when the remote is getting closer, and lock/arm when the remote is far away. 1) automatic door lock/unlock function s...

  • Page 8

    Two-way remote user’s guide 16 two-way remote user’s guide 15 aux mode entry (on/off) as you enter aux mode, the icon will be displayed. If an auxiliary channel is not triggered within 60 sec., aux mode will be cancelled. An auxiliary channel can be pro- grammed for a pulsed, latched, or timed latch...

  • Page 9

    1) extension of remote start timer during the running time, if you press button i for 2 sec. “ start-again” will scroll across the screen once and the timer will be reset to the preset time. 2) remote start display if the remote start confirmation is not received by the remote for different reasons,...

  • Page 10

    Two-way remote user’s guide 20 two-way remote user’s guide 19 button functions valet mode on/off activate valet mode by pressing buttons i + iii for 0.5 sec. At the same time. (valet mode can also be activated with the ignition key as well, see page 36.) valet mode will put the system to sleep and a...

  • Page 11

    Two-way remote user’s guide 22 two-way remote user’s guide 21 button functions passive arming on/off passive arming, which will lock/arm the vehicle if it is disarmed, after 30sec, can be turned on by pressing buttons ii + iii at the same time, it operates under the following conditions. Two-way rem...

  • Page 12

    Two-way remote user’s guide 24 two-way remote user’s guide 23 timer start reservation is activated by pressing buttons ii+ iv at the same time for 0.5 sec if timer has been set up. Once activated, the vehicle will start by itself at preset time in every 24 hours . (see page 42-timer start set-up) ti...

  • Page 13

    Two-way remote user’s guide 26 two-way remote user’s guide 25 parking timer (on/off) tap twice 4) parking timer release parking timer will be turned off with a chirp from the remote, if buttons ii+ iv are pressed for more than 2 sec, while the parking timer is on. ~beep twice, 4 times 2min and 30 se...

  • Page 14

    Two-way remote user’s guide 28 two-way remote user’s guide 27 option functions warning of vehicle battery drain. Two-way remote user’s guide 26 one flashing light trunk open sensor if the vehicle is locked (armed) with a taillight on, the parking lights will flash once and siren will chirp 7 times w...

  • Page 15

    Warning of vehicle battery drain two-way remote user’s guide 30 one flashing light if the vehicle is locked (armed) with a taillight on, the parking lights will flash once and siren will chirp 7 times with this sensor installed and the alarm armed, the alarm will be triggered if the trunk is opened....

  • Page 16

    Two-way remote user’s guide 32 two-way remote user’s guide 31 if the alarm is armed and the shock sensor is triggered by an impact to the vehicle, the following sequence will occur: if the alarm is armed and the door, trunk, or hood is opened, the following sequence will occur: if the alarm is armed...

  • Page 17

    Two-way remote user’s guide 34 two-way remote user’s guide 33 cold start functions this is the function that when the timer start reservation is on, engine will be started automati- cally based on fixed 3 steps of temperature setting if the temperature is below 0 , the engine will be started automat...

  • Page 18

    Two-way remote user’s guide 36 knocking (for door open or entering the password.) two-way remote user’s guide 35 the password should be entered under the, (see page 28). After the first set the second, third, and fourth password numbers should be entered the same as above. (as the password has four ...

  • Page 19

    Two-way remote user’s guide two-way remote user’s guide time information backup door open indicating function 1) it saves time information (current time, start-up reservation time and alarm time) in the status where power has not been supplied to remote (at a time of replacing batteries). If the pow...

  • Page 20

    Two-way remote user’s guide 40 two-way remote user’s guide 39 when this product is installed in a manual transmission vehicle, it must be set to manual transmission mode. Our company is not responsible for any accident resulting from selecting wrong mode (automatic transmission mode) for a manual tr...

  • Page 21

    Two-way remote user’s guide 42 two-way remote user’s guide 41 controlling shock sensor sensitivity to adjust the shock sensor sensitivity, locate the shock sensor and adjust the dial on the sensor. The higher the number on the dial, the higher the sensitivity of the sensor. Shock sensor sensitivity ...

  • Page 22

    Two-way remote user’s guide 44 two-way remote user’s guide 43 function button application method set-up of alarm clock time set-up/can- cellation of alarm clock function set-up of timer start reservation time set-up/cancel- lation of remote paging sensor set-up/can- cellation of vibration mode fahre...

  • Page 23

    45 two-way remote user’s guide.