Magicar m110as bruger User Manual - page 11
Two-Way Remote User’s Guide
22
Two-Way Remote User’s Guide
21
Button Functions
Passive Arming ON/OFF
Passive Arming, which will lock/arm the vehicle if it is disarmed, after 30sec, can be
turned ON by pressing buttons
II + III
at the same time, it operates under the following
conditions.
Two-Way Remote User’s Guide
20
After remote start reservation is complete in a manual transmission vehicle.
In the case of turbo function ON, after the door is open and closed following the
removal of Key
2. Passive Arming OFF
To turn off Passive Arming, press buttons
II+ III
buttons at the same time for 0.5
sec. The siren will beep twice and the parking lights will flash.
~Beeps once
Flashes 5 times
If Passive Arming is ON, the doors will be locked
automatically, the remote should be taken with you
when you leave the vehicle so that it does not get locked
inside.
If you will be staying in the vehicle for an extended
period of time without the engine running, you should
turn Passive Arming off so that it does not become a
nuisance.
While ignition is off after
the door is open and closed.
When the alarm is disarmed.
1. Instant Locking
Two-Way Remote User’s Guide
19
Button Functions
Shock Sensor ON/OFF
To turn off the shock sensor, press buttons
I + III
for 2 sec.
The shock sensor is turned off if the [
] icon is displayed on the LCD of the
remote.
This mode is useful if you will be parked in a loud or high traffic area such as an
airport. Turning the shock sensor off will help prevent false alarms.
~Beeps once
Flashes 5 times
[ ]
Drive Lock (Ignition control door lock) ON/OFF
Drive lock icon “ [
]” will be displayed on remote control, by pressing
I+ IV
buttons for 0.5 sec at the same time, and the doors will be locked right after brake
padal is pushed
1. Drive Lock OFF
Drive lock will be OFF, and drive lock icon will be turned off, again by pressing
I+ IV
buttons for 0.5 sec at the same time.
Drive Lock function is not activated:
during remote start,
a door opens within 30 seconds after ignition is turned on,
a door is open when the vehicle is started with key.
Doors will be unlocked when ignition is turned off.
Valet Mode (ON/OFF)
Activate Valet mode by pressing buttons
I + III
for 0.5 sec. at the same time. (Valet
mode can also be activated with the ignition key as well, see page 36.) Valet mode
will put the system to sleep and almost all functions will be disabled. Remote
lock/unlock, code unlock, remote option programming, and the query function will
still operate.
1) Valet Mode OFF
Pressing buttons
I + III
for 0.5 sec. at the same time again will turn Valet mode
OFF, which restores all functions to the remote.
2) Valet Mode Display
The only functions available will be:
1. Button I for 0.5 sec. (lock/unlock)
2. Buttons I + III for 0.5 sec. (Valet OFF)
3. Button IV for 0.5 sec. (Query Function)
4. Button III double press. (EL Lamp ON)
5. Buttons II + III for 2 sec. (Remote Set-Up)
If any other functions are attempted, the remote will beep three times and “ SLEEP”
will scroll across the screen to indicate that the system is in Valet mode.
~Beeps three times.
When the system is in Valet mode, the alarm is not
active, even when the doors are locked. Any starter or
ignition kill systems that have been installed will be
disabled as well.
If you loan your vehicle to someone who is not familiar
with this CompuStar system, you may want to use
Valet mode to avoid any problems they might have by
accidentally activating various features.
Shock Sensor (ON/OFF)
To turn off the shock sensor, press buttons
I + III
for 2 sec.
The shock sensor is turned off if the [
] icon is displayed on the LCD of the
remote.
This mode is useful if you will be parked in a loud or high traffic area such as an
airport. Turning the shock sensor off will help prevent false alarms.
~Beeps once
[ ]
Drive lock icon “ [
]” will be displayed on remote control, by pressing
I+ IV
buttons for 0.5 sec at the same time, and the doors will be locked right after brake
padal is pushed
Drive Lock OFF
Drive lock will be OFF, and drive lock icon will be turned off, again by pressing
I+ IV
buttons for 0.5 sec at the same time.
Drive Lock function is not activated:
during remote start,
a door opens within 30 seconds after ignition is turned on,
a door is open when the vehicle is started with key.
Doors will be unlocked when ignition is turned off.
Drive Lock(Ignition control door lock) (ON/OFF)