Magma A10-205 Owner's Manual - Connecting Fuel Source
CONTROL VALVE REGULATOR
•Uses standard 1-lb. disposable propane canisters
(DOT-39 NRC 228/286).
•Prior to installing valve, become familiar with the valve
function and graphics on valve knob. Never force the knob.
Always turn or push gently.
•Turn control valve to “lock ” and install gas canister being
careful not to cross the threads. Check for leaks prior to use,
by brushing soapy water solution around threads and orifice
hole checking for bubbles.
CONNECTING FUEL SOURCE
High
Low
Medium
Indicator
Lock
Off
Unlock
OFF/
Lock
ON
5
USING GRILL WITH ON-BOARD LPG (PROPANE) SYSTEMS
• Use only Magma Type 3 Low
Pressure LPG (Propane)
Valves. See our Valve
Application Guide at
www. MagmaProducts.com
for correct valve.
• In North America use Magma
A10-225 LPG 10' Gas Grill
Connection Kit in conjunction
with Type 3 Valve. Outside
North America check your local
dealer for proper hose and fittings.
• A primary shutoff valve (supplied
with Gas Grill Connection Kit)
must be used with this control
valve at point of connection into
your system. This allows shut off of
gas supply to hose leading to grill.
10
11
Propane (LPG)
Gas
Regulator
A10-225 LPG (Propane)
10' Gas Grill Conversion Kit
To other LPG
appliance
or use cap
Shut off
valve
Cylinder Valve
Gauge
Gas grill
Type 3
Valve
Solenoid
Typical Boat and R.V. Application
Gently insert valve stem into venturi tube upside down until fully
inserted and rotate as shown.
• Magma On-Board LPG (Propane) Valves and Lpg (Propane) Low Pressure Gas Grill Connection Kits allow Magma
Grills to be installed within a boats existing on-board, pre-regulated low pressure LPG (Propane) system.
Valve will feel loose and will rotate easily. Even though the valve feels loose, it is designed that way and will
not leak. The valve was designed to be loose fitting in order to allow safe, easy installation and removal of the
propane canister and so it easily swings without resistance to fit all applications.