Magma ExpressBox EB3T-DB User Manual - Control Fan Speed
Other manuals for ExpressBox EB3T-DB:
User Manual
Manual is about: Thunderbolt to PCIe Expansion
of
72
Magma
ExpressBox 3T | Chapter 4 Technical Information
36
Chapter 4 Technical Information
Control Fan Speed
For low power or self-cooled cards you can reduce the fan noise by moving the jumper found under the removable
cooling fan at the front of the chassis to the slowest speed setting. If the chassis gets hot during use, you should
increase the fan speed to provide more cooling.
You will need a pair of needle nose pliers or a similar tool used for grabbing small jumpers. Remove the fan cage at
the front of the chassis and you will see a small board as shown below.
The Factory Default is setting 2 (medium). The slowest speed is setting 4 and the fastest speed is setting F.
F = fastest 1 = fast 2 = medium (default)
3 = slow 4 = slowest