Magma ExpressBox EB3T-DB User Manual - Interface Card Installation
Other manuals for ExpressBox EB3T-DB:
User Manual
Manual is about: Thunderbolt to PCIe Expansion
of
72
Magma
ExpressBox 3T | Chapter 5 Thunderbolt Interface Card Upgrade
57
Chapter 5 Thunderbolt Interface Card Upgrade
Interface Card Installation
Uninstall the existing Thunderbolt Interface card in the chassis prior to installing the new Thunderbolt™ 2
Interface card.
1.
Remove the screw on top of the mounting bracket.
2. Disconnect the 3-pin wire / power cable from the Interface card, as shown from pictures below.
3. Gently pull the Thunderbolt Interface card out in the PCIe slot.
4. Prepare the new Thunderbolt™ 2 Interface card (see picture below).