For model p10-501 owner’s manual read these instructions carefully before use. Familiarize yourself with the appliance before connecting it to its gas container. Keep these instructions for future reference. For questions regarding performance, assembly, operation, parts, or returns, contact the exp...
• use outdoors only. • do not use this appliance inside the boat or any enclosed space. • grills radiate heat. Clearance from combustibles, 24” sides and back. Never use under awnings, patio covers, etc. • use propane gas only. Fuel storage should be in compliance with the american boat and yacht co...
Danger: never cover ventilation holes. Setting up your grill 3 1 1a 2 3 4 5 6.
7 select and install appropriate magma mount in your desired location. Prior to installing the grill, check that mount does not easily move with a reasonable force applied. 8 next, decide if gas control valve will be easier to access from the center right side or center left side of grill. This will...
5 12 13 14.
5a using grill with on-board lpg (propane) systems • magma on-board lpg (propane) valves and hose kits allow magma grills to be installed within a boats existing on-board, pre-regulated low pressure lpg (propane) system. • use only magma type 3 low pressure lpg (propane) valves. See our valve applic...
6 operating procedures warning: do not overheat grill. Magma grills do not require pre-heating. Stainless steel loses anti-corrosive characteristics when subjected to extreme heat. Most grilling is done on low temperature with the lid closed. If medium or high heat is required, grill with lid open. ...
Maintenance 7 a word about stainless steel: stainless steel, contrary to popular belief, can rust. Most commonly, deposits on the surface of the product will trap moisture. It is this moisture that robs the stainless steel of oxygen. Oxygen is the element that reacts with the stainless steel to form...
P10-501 original size 10-253 cooking grill 10-466 radiant plate 10-657 burner 10-258 flame deflector 10-259 bowl 10-161 grease tray 10-164 "l" bracket & clamp assembly 10-160 turbo venturi tube assembly 10-263 control valve regulator-type 1 10-151 knob assembly 10-152 lid assembly replacement parts ...
9 trouble shooting guide problem burner will not light flare-up yellow sooty flame blow-out hot spots possible cause no gas flow obstructed gas flow excessive cooking temperature grease and/or residue build-up excessive fat in meats excessive oils in marinades obstructed gas flow flame too low wind ...
83-501p 0808 magma products, inc. 3940 pixie avenue, lakewood, ca 90712 • usa phone (562) 627-0500 • e-mail: mail@magmaproducts.Com www.Magmaproducts.Com magma and the magma logo are registered trademarks of magma products, inc. Patent pending. Magma products, inc. Guarantees this product to be free...
