Magma P10-501 Owner's Manual - Connecting Fuel Source
7 Select and install appropriate Magma mount in your desired location. Prior to installing the
grill, check that mount does not easily move with a reasonable force applied.
8 Next, decide if gas control valve will be easier to access from the center right side or center
left side of grill. This will be based on your placement of the mount (see picture front
cover). Now, slide L-Bracket & Clamp on to mount knurled rod so that the threaded flat
L-portion of the L-Bracket points in that direction (see above).
9 Adjust threaded flat surface of L-Bracket to level position and tighten firmly with two 9/16"
or adjustable wrenches so that L-Bracket & Clamp cannot be moved. NOTE: Level positioning
is critical for even temperatures across the cooking surface.
10 Carefully hold the grill body, with the lid closed, and thread on to L-Bracket VERY TIGHT
so that grill does not unthread easily. Check that grill is tight and level prior to proceeding.
7
10
CONTROL VALVE REGULATOR
•Uses standard 1-lb. disposable propane canisters (DOT-39 NRC 228/286).
•Prior to installing valve, become familiar with the valve function and graphics on valve
knob. Never force the knob. Always turn or push gently.
•Turn control valve to “lock ” and install gas canister being careful not to cross the
threads. Check for leaks prior to use, by brushing soapy water solution around threads
and orifice hole checking for bubbles.
11 Insert the venturi tube into the threaded pipe on
the bottom of the grill body and firmly tighten the
threaded nut so nut doesn't turn while rotating
the turbo venturi tube. Note: venturi tube should
still rotate freely. Venturi tube should be stowed
with valve in a clean dry environment when not
in use. (See "Stowing Tips" page 6) Before each
use, prior to inserting venturi tube, check that the
threaded pipe is free of spider web obstructions.
CONNECTING FUEL SOURCE
High
Low
Medium
Indicator
Lock
Off
Unlock
OFF/
Lock
ON
4
Mounts sold separately. See our website www.MagmaProducts.com for mounting options.
Level
Flat
Surface
9
8
11
Valve will feel loose and will rotate
easily. Even though the valve feels
loose, it is designed that way and
will not leak. The valve was
designed to be loose fitting in order
to allow safe, easy installation and
removal of the propane canister and
so it easily swings without
resistance to fit all applications.