Magnacom MAG-1001S User manual - Section 4: Maintenance
10
SECTION 4: MAINTENANCE
Although the Magnacom
®
MAG-1001S has a rugged design, it should be treated
carefully like any quality electronic instrument. Avoid transportation modes that
would expose the unit to constant vibrations and disturbance. Ship the unit well
packaged.
After use, wipe the unit free of dirt, debris, and water. Use a clean, soft cloth.
Warm water with a small amount of nonabrasive soap is the recommended clean-
ing solution.
The transducer should be kept clean and free of oils. The transducer itself can be
cleaned with denatured alcohol. If wet after a dive, the transducer assembly should
be stored in a separate container.
Store the hand-held microphone and optional headset in a dry area. The micro-
phones are barely water resistant, not waterproof. Keep them free of water and
water spray. The preferred cleaning method is to use a mild soap solution followed
by wiping the microphone dry.
Inspect batteries periodically to ensure they are in good condition and not leak-
ing.
When the MAG-1001S is not being used, it is a good idea to keep the cover se-
curely fastened.
Remember, when the transducer assembly is connected to the MAG-1001S, the
power is on. To conserve energy when securing or cleaning the MAG-1001S,
disconnect the transducer connector from the front panel.