Magnasonic PP72 User Manual - Troubleshooting
- 14 -
Q.
The projected image is blurry.
A.
Adjust the focus wheel on the projector to fine-tune the picture.
Also check that the surface you are projecting on is smooth.
Q.
The projected image is too small.
A.
Move the projector farther away from the projection surface.
Q.
The projector is not projecting.
A.
Here are several things to check if your projector is not projecting:
•
If on battery power, check the battery life remaining by pressing
the power button. If battery power is low, plug into AC power.
•
If on AC power, check that the AC power is plugged into the
correct port on the projector and the AC adapter is securely
plugged into a powered outlet.
•
If using a wired connection, check the compatibility section of this
manual to ensure you are using any necessary adapters to connect
your device. If an adapter is required, power down the projector,
add the adapter, and then turn the projector back on. Also check
with your device manufacturer to ensure your device supports
video out.
•
If using a wireless connection, check the compatibility section
of this manual for instructions. Also check with your device
manufacturer to ensure your device supports wireless screen
mirroring.