Magnavox 32MF301B Owner's Manual - page 7
7
Eng
lish
English
English
MAGNAVOX 32
4 Use your TV
Watching channels from an external
device
1
Turn On a set-top box or the connected device.
•
The picture from your set-top box or the connected device
might appear automatically on the TV screen.
If the picture does not appear
Press SOURCE repeatedly to select the set-top box or
the connected device and wait a few seconds till the
picture appears.
2
Use the remote control of the set-top box or the
connected device to select channels to view.
Switching audio mode
Digital TV operation
1
Press SAP to display the currently
P
selected language and the number of
available languages.
11.1
English 1/3
2
Press SAP repeatedly to cycle through the available
P
audio languages.
Note
•
Available languages differ depending on the broadcast.
•
Other is displayed when the audio language cannot be acquired or
r
the acquired languages are other than English, French or Spanish.
Analog/Cable TV operation
1
Press SAP to display the currently selected audio mode.
P
2
While receiving an MTS broadcast, press
repeatedly to cycle through the available
audio channels.
11
SAP
/ STEREO
Sleep timer
Sleep timer can set the unit to go into Standby mode after
an incremental period of time.
Press SLEEP repeatedly to change the
amount of time (increases the time by 30
minutes up to 120 minutes).
Sleep 120min.
Press SLEEP once to call up the display for checking the
remaining time.
•
To cancel sleep timer, press SLEEP repeatedly until Sleep Off is
f
displayed.
ECO
You can Turn On ECO mode to conserve power.
Press ECO once to Turn On ECO mode and reduce power
consumption.
Press ECO again to Turn Off ECO mode.
ECO On
ECO Off
On
Reduces power consumption.
Off
Sets the backlight brighter.
Note
•
You must set Home in Location.
➠
p. 10
Otherwise, the settings you adjusted will not be saved when the
unit goes into standby mode.
Changing picture and sound settings
You must set Home in Location (refer to page 10).
Otherwise, personalized picture and sound settings will not
be memorized after the unit goes into Standby mode.
Changing picture settings
1
Press MENU and use ▲▼ to select Picture, then press
OK.
Picture
Sound
Setup
Features
Language
Smart picture
Brightness
Contrast
Color
Tint
Sharpness
Color temperature
Noise reduction
Personal
30
60
36
0
0
Normal
On
2
Use ▲▼
◄►
to select the item you want to adjust,
then press OK.
Smart picture
to select the desired setting, then press OK
(Personal, Standard, Sports, Movie and Game)
When you adjust the following settings,
Personal will be set automatically.
Cursor ◄
Cursor ►
Brightness
to decrease brightness to increase brightness
Contrast
to decrease contrast to increase contrast
Color
to decrease color
intensity
to increase color
intensity
Tint
to add red
to add green
Sharpness
to soften
to sharpen
Color
temperature
to select the desired setting, then press OK
(Warm, Normal and Cool)
Noise reduction
On
to reduce noise in an image
Off
to set noise reduction to Off
LC9̲MAG̲EMER̲26̲32̲EN.indd 7
LC9̲MAG̲EMER̲26̲32̲EN.indd 7
2012/05/30 16:27:44
2012/05/30 16:27:44